Setting the phone with the PC
Logging in, setting the Web configurator language
Once you have successfully established the connection, the
displayed in the Web browser.
You can select the language you want the menus and Web configurator dia-
logues to be displayed in. The language that is currently selected is displayed in
the top field of the Web page.
¤
If necessary, click
¤
Select the language.
¤
Enter your phone's system PIN (default setting: 0000) in the bottom field of
the Web page, to access the Web configurator functions.
¤
Select OK.
Once you have successfully logged in, a
mation on the Web configurator.
If you enter an incorrect system PIN, a corresponding message is displayed. You
will be prompted to re-enter the PIN.
If you enter an incorrect system PIN a second time, the PIN field will be blocked
for a short time (grayed out). The duration of the block will double each time a
PIN is subsequently entered incorrectly.
Please note
u
If you have forgotten your system PIN, you must restore your device's fac-
tory settings. Please note that this will restore all other settings too
£
(
Page
u
After approximately 10 minutes of inactivity, you will be automatically
logged off. The next time you try to make an entry or open a Web page, the
Login
u
Any entries that you did not save on the phone before automatic log-off
will be lost.
Logging off
In the menu bar (
configurator, you will see the
the Web configurator.
Warning
Always use the
tor. If, for example, you close the Web browser without logging off before-
hand, it is possible that access to the Web configurator will be blocked for a
few minutes.
98
to open the list of available languages.
85).
Web page is displayed. Enter the system PIN again to log in back.
£
Page
99) at the top right of every Web page in the Web
command to end the connection to the Web configura-
Log Off
Home
screen opens with general infor-
Log Off
command. Select
Web page is
Login
Log Off
to log off from