Removing The Display Assembly; Prerequisites; Procedure - Dell P57F003 Service Manual

GUID-AB1F153B-621B-42FC-89BE-0E1105FF1786

Removing the display assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
GUID-B5230F2E-487B-4214-A52B-237499DD89AF

Prerequisites

1 Remove the base
2 Remove the battery.
3 Follow the procedure from step 1 to step 3 in
4 Remove the keyboard
5 Remove the palm-rest
6 Remove the fans.
GUID-0298D5D0-CBE7-4691-AC0D-95968070FA30

Procedure

1 Close the display and turn the computer over.
2 Using the pull tab, disconnect the display cable from the system board.
3 Note the display-cable routing and remove the cable from the routing guides on
the computer base.
4 Disconnect the antenna cables from the wireless card.
5 Note the antenna-cable routing and remove the antenna cables from the routing
guides on the computer base.
84
computer. After working inside your computer, follow
After working inside your
cover.
assembly.
computer. For more safety best
www.dell.com/
"Removing the hard
Before
drive".