GUID-1C25F362-25CF-40CD-8A9B-2B98FB94F5FC
Removing the solid-state drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling the
solid-state drive.
CAUTION: To avoid data loss, do not remove the solid-state drive while the
computer is in sleep or on state.
GUID-5C007FC3-4C5D-4913-AFA6-A840EA586B34
Prerequisites
Remove the
base
GUID-DE9C5276-5B8B-411B-8A13-9051BA00A348
Procedure
1
Remove the screw (M2x3) that secures the solid-state drive shield and solid-
state drive to the computer base.
2
Slide and remove the solid-state drive shield from the solid-state drive.
NOTE: Solid-state drive shield is applicable to computers that are
shipped with PCIe/NVMe solid-state drive.
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before
29