Solid-State Drive; Removing The M.2 2230 Solid State Drive - Dell Latitude 7350 Owner's Manual

Figure 20. Installing the base cover
Steps
1. Place the base cover on top of the palm-rest and keyboard assembly.
2. Align the screw holes on the base cover with the screw holes on the palm-rest and keyboard assembly, and snap the base
cover latches into place.
3. Tighten the eight captive screws to secure the base cover to the palm-rest and keyboard assembly.
Next steps
1. Follow the procedure in

Solid-state drive

Removing the M.2 2230 solid state drive

Prerequisites
1. Follow the procedure in
NOTE: Solid state drives are fragile. Exercise care when handling the solid state drive.
NOTE: To avoid data loss, do not remove the solid state drive while the computer is in sleep or on state.
2. Remove the base cover.
52 Removing and installing Customer Replaceable Units (CRUs)
After working inside your
Before working inside your
computer.
computer.