Table of Contents
Advertisement
Table 39. System Setup options—Connection menu (continued)
Connection
Bluetooth
Contactless Smartcard/NFC
Enable UEFI Network Stack
Wireless Radio Control
Control WLAN Radio
Control WWAN Radio
Dynamic Wireless Transmit Power
HTTP(s) Boot
HTTP(s) Boot Modes
CA Certificate
108
BIOS Setup
By default, the WLAN option is enabled.
Enables or disables the internal Bluetooth device.
By default, the Bluetooth option is enabled.
Enables or disables the smartcard device.
By default, the Contactless Smartcard/NFC option is enabled.
NOTE:
To view this option, enable Advanced Setup mode as described in
View Advanced Setup
Enables or disables the UEFI Network Stack and controls the onboard LAN
Controller.
By default, the Enable UEFI Network Stack option is enabled.
NOTE:
To view this option, enable Advanced Setup mode as described in
View Advanced Setup
Enables to sense the connection of the computer to a wired network and then
disables the selected WLAN radio. Upon disconnection from the wired network,
the selected wireless radios are reenabled.
By default, the Control WLAN Radio option is disabled.
NOTE:
To view this option, enable Advanced Setup mode as described in .
Enables to sense the connection of the computer to a wired network and then
disables the selected WWAN radios.
By default, the Control WWAN Radio option is disabled.
NOTE:
To view this option, enable Advanced Setup mode as described in
View Advanced Setup
When enabled, the computer increases the transmit power of the WLAN device
to improve performance in certain computer configurations.
NOTE:
To view this option, enable Advanced Setup mode as described in
View Advanced Setup
When enabled, supports HTTP(s) boot on the client BIOS, which offers wired or
wireless and HTTP/HTTPS connection options.
NOTE:
To view this option, enable Advanced Setup mode as described in
View Advanced Setup
In Auto Mode, the boot URL is obtained from the DHCP response; the boot URL
specifies the HTTP Boot Server and location of the Network Boot Program (NBP)
file. In Manual mode, the user enters the URL in the text box, which must start
with http:// or https:// and end with the NBP file name.
By default, Auto Mode is selected.
NOTE:
To view this option, enable Advanced Setup mode as described in
View Advanced Setup
Upload or delete the CA certificate.
NOTE:
To view this option, enable Advanced Setup mode as described in
View Advanced Setup
options.
options.
options.
options.
options.
options.
options.
Advertisement
Table of Contents
