Lenovo 10KW User Manual page 74

5. Pull the Wi-Fi card out of the M.2 Wi-Fi card slot.
Figure 31. Removing the Wi-Fi card
6. Insert the new Wi-Fi card into the M.2 Wi-Fi card slot. Ensure that the Wi-Fi card is inserted firmly. Then,
pivot the Wi-Fi card as shown so that the screw notch on the Wi-Fi card aligns with the mounting stud
on the system board.
Note: Do not touch the notched edge of the Wi-Fi card.
Figure 32. Installing the Wi-Fi card
7. Install the screw to secure the Wi-Fi card to the system board, and then connect the Wi-Fi antenna
cables to the Wi-Fi card.
Figure 33. Connecting the Wi-Fi antenna cables
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 66.
64
Lenovo S510 User Guide