Step 2 Preparing The Power Supply - Sony DSR-250 Operating Instructions Manual

Step 2 Preparing the power supply

Installing the battery pack
(1) Attach the battery pack against the rear of the camcorder, aligning the side line
of the battery pack with the line on the camcorder.
(2) Slide the battery pack down until its "bLOCK" arrow points at the matching
line on the camcorder.
1
To remove the battery pack
Holding the battery release button in, pull the battery pack up.
2
Battery pack
Align these lines.
Matching line on
the camcorder
"LOCK" arrow
Battery release button
9