Table of Contents
Advertisement
Time is not displayed.
1. Make sure that the antenna is installed properly.
2. Adjust the antenna direction or move the FWT to the place covered with better signal
strength.
3. If time is still not displayed, contact your service provider to check whether the FWT is
in the signal coverage area.
After the FWT is powered off, the display displays nothing
sometimes and power supply icon and blinking battery icon
sometimes.
No information on the display is a normal status of FWT after power-off. The
power supply icon and a blinking battery icon indicate that the battery is being
charged.
Hear the ring tone after hearing the busy tone.
The ring tone indicates that there is an incoming call. If you are in a call, you can
answer the call.
After lifting the handset, hear the ring tone when you are ready to dial
or are dialing a phone number.
It indicates that there is an incoming call. If you are not in a call, you can answer
the call.
The display only displays the battery icon.
It indicates that the FWT is powered by the spare battery. If the FWT is powered
solely by the spare battery and the battery icon is blinking without any bar inside,
it indicates that the battery level is low. In this case, use the power adapter to
charge the battery or replace the spare battery.
37
Advertisement
Table of Contents
