Address Space - Siemens SIMATIC S7-1500 Manual

Parameters/address space

4.4 Address space

4.4 Address space
The module can be configured differently in STEP 7; see following table. Depending on the
configuration, additional/different addresses are assigned in the process image of the
outputs/inputs.
Configuration options of AQ 4xU/I ST
You can configure the module with STEP 7 (TIA Portal) or with a GSD file.
When you configure the module by means of the GSD file, the configurations are available
under different abbreviations/module names.
The following configurations are possible:
Table 4- 3 Configuration options
Configuration
1 x 4-channel without value status
1 x 4-channel with value status
4 x 1-channel without value status
4 x 1-channel with value status
1 x 4-channel with value status for module-
internal Shared Output with up to 4 sub-
modules
Value status (Quality Information, QI)
The value status is always activated for the following module names:
● AQ 4xU/I ST QI
● AQ 4xU/I ST S QI
● AQ 4xU/I ST MSO
An additional bit is assigned to each channel for the value status. The bit for the value status
indicates if the output value specified by the user program is actually pending at the module
terminal (0 = value is incorrect).
18
Abbrevia- Configuration software, e.g., with STEP 7 (TIA Portal)
tion/module name
Integrated in hardware cata-
in the GSD file
log STEP 7 (TIA Portal)
AQ 4xU/I ST
AQ 4xU/I ST QI
AQ 4xU/I ST S V13 Update 3 or higher
AQ 4xU/I ST S QI V13 Update 3 or higher
AQ 4xU/I ST MSO V13 Update 3 or higher
Analog output module AQ 4xU/I ST (6ES7532-5HD00-0AB0)
V12 or higher
V12 or higher
(PROFINET IO only)
(PROFINET IO only)
(PROFINET IO only)
Manual, 07/2014, A5E03484696-AC
GSD file in
STEP 7 (TIA Portal)
V12 or higher or
STEP 7 V5.5 SP3 or
higher
X
X
X
(PROFINET IO only)
X
(PROFINET IO only)
X
(PROFINET IO only)