Dell OptiPlex 7040M Owner's Manual page 31

Table 12. Power Management (continued)
Option
Intel Ready Mode
Table 13. POST Behavior
Option
Adapter Warning
Numlock LED
MEBx Hotkey
Keyboard Errors
Fast Boot
Table 14. Virtualization Support
Option
Virtualization
VT for Direct I/O
Trusted Execution
Table 15. Wireless
Option
Wireless Device Enable
Table 16. Maintenance
Option
Service Tag
Asset Tag
SERR Messages
BIOS Downgrade
Description
Allows you to enable the capability of Intel Ready Mode Technology. This option is disabled
by default.
Description
Allows you to choose whether the system displays warning messages when you use certain
power adapters. This option is enabled by default.
Allows you to enable or disable the Numlock feature when your computer starts. This option
is enabled by default.
Allows you to specify whether the MEBx Hotkey function should be enabled when the
system boots. This option is enabled by default.
Allows you to enable or disable the keyboard error reporting when the computer starts. This
option is enabled by default.
This option can speed up the boot process by bypassing some compatibility steps:
● Minimal — The system boots quickly, unless the BIOS has been updated, memory
changed, or the previous POST did not complete.
● Thorough — The system does not skip any steps in the boot process.
● Auto — This allows the operating system to control this setting (this works only when
the operating system supports Simple Boot Flag).
This option is set to Thorough by default.
Description
This option specifies whether a Virtual Machine Monitor (VMM) can utilize the
additional hardware capabilities provided by Intel® Virtualization Technology. Enable Intel
Virtualization Technology - This option is disabled by default.
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional
hardware capabilities provided by Intel® Virtualization technology for direct I/O. Enable
Intel Virtualization Technology for Direct I/O - This option is disabled by default.
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the
additional hardware capabilities provided by the Intel Trusted Execution Technology. This
option is disabled by default.
Description
Allows you to enable or disable the internal wireless devices. All the options are enabled by
default.
Description
Displays the Service Tag of your computer.
Allows you to create a system asset tag if an asset tag is not already set. This option is not
set by default.
Controls the SERR message mechanism. This option is not set by default. Some graphics
cards require that the SERR message mechanism be disabled.
Allows you to control flashing of the system firmware to the previous versions. This option is
enabled by default.
Configuración del sistema 31