Installing The Cover; Removing The Hard Drive Assembly - Dell OptiPlex 7040M Owner's Manual

Installing the cover

1. Place the cover on the computer.
2. Slide the cover toward the back of the computer to install it.
3. Tighten the screw to secure the cover to the computer.
4. Follow the procedure in

Removing the hard drive assembly

1. Follow the procedure in
2. Remove the cover.
3. To remove the hard drive assembly:
a. Press the blue tabs on both sides of the hard drive assembly [1].
b. Push the hard drive assembly to release it from the computer [2].
c. Remove the hard drive assembly from the computer [3].
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Extracción e instalación de componentes 7