Chapter 1 Installing Windows
3.5.3
Using Graphics Accelerator
The drivers are installed by Standard Program Package.
If you install the Graphics accelerator after installing Standard Program Package, install Standard Program
Package again according to Chapter 1 (3.4 Standard Program Package Installation).
3.5.4
Using SAS Controller (N8103-197)
The drivers are installed by Standard Program Package.
If you install the SAS controller (N8103-197) after installing Standard Program Package, install Standard
Program Package again according to Chapter 1 (3.4 Standard Program Package Installation).
3.5.5
Using RAID Controller (N8103-196)
The drivers are installed by Standard Program Package.
If you install the RAID controller (N8103-196) after installing Standard Program Package, install Standard
Program Package again according to Chapter 1 (3.4 Standard Program Package Installation).
3.5.6
Using Fibre Channel Controller (N8190-163/164/165/166/171/172)
The drivers are installed by Standard Program Package.
If you install the Fibre Channel controller (N8190-163/164/165/166/171/172) after installing Standard Program
Package, install Standard Program Package again according to Chapter 1 (3.4 Standard Program Package
Installation).
3.5.7
Chipset driver
The drivers are installed by Standard Program Package.
If the driver has been installed by an automatic option or manual option, execute the "Cp037322.exe" file from
"/software/005/drivers/chipset_driver/2016" in the "Starter Pack" DVD. Hereafter, perform the operation
according to the messages.
After the completion of installation, restart the system.
The application of the Chipset driver has been completed.
Express5800/R110j-1 Installation Guide (Windows)
Installing Windows Server 2016
47