Table of Contents
Advertisement
Chapter 1 Installing Windows
3.5.3 Using Graphics Accelerator
For installation with the Rapid Setup or Manual installation, the drivers are installed by Standard Program
Package.
If you install the Graphics Accelerator driver after installing Standard Program Package, install Standard Program
Package again according to Chapter 1 (3.4 Standard Program Package Installation).
3.5.4 Using SAS Controller (N8103-197)
For installation with the Rapid Setup or Manual installation, the drivers are installed by Standard Program
Package.
If you install the SAS controller (N8103-197) after installing Standard Program Package, install driver by following
steps.
1.
Insert the Starter Pack DVD into the optical disk drive.
2.
Run the \packages\cp051257.exe on the DVD to install the driver.
3.
After installing driver, restart the server.
3.5.5 Using RAID Controller (N8103-189/190/191/192/193/194/195/196/201/237/238)
For installation with the Rapid Setup or Manual installation, the drivers are installed by Standard Program
Package.
If you install the RAID controller (N8103-189/190/191/192/193/194/195/196/201/237/238) after installing
Standard Program Package, install driver by following steps.
1.
Insert the Starter Pack DVD into the optical disk drive.
2.
Run the \packages\cp051257.exe on the DVD to install the driver.
3.
After installing driver, restart the server.
3.5.6 Using Fibre Channel Controller (N8190-163/164/165/166/171/172)
For installation with the Rapid Setup or Manual installation, the drivers are installed by Standard Program
Package.
If you install the Fibre Channel controller (N8190-163/164/165/166/171/172) after installing Standard Program
Package, install Standard Program Package again according to Chapter 1 (3.4 Standard Program Package
Installation ).
64
Installation Guide (Windows Server 2016)
3. Installing Windows Server 2016
Advertisement
Table of Contents
