NEC Express5800/R120i-1M Installation Manual page 98

Hide thumbs Also See for Express5800/R120i-1M:
Table of Contents

Advertisement

Chapter 3 Appendix
Source
ID
Timing when an event is logged
Windows Server 2016
icea
91
When installing an OS, starting system, or
applying Standard Program Package
i40eb
101
When installing an OS, starting system, or
applying Standard Program Package
icea
101
When installing an OS, starting system, or
applying Standard Program Package
Microsoft-Windows-
Kernel-PnP
219
When starting system or connecting a disk
Kernel-PnP
225
When applying Standard Program Package
98
Level
"System Log"
Error
Warning
Warning
Warning
Warning
Installation Guide (Windows Server 2016)
Message (Description)
Action
Intel(R) Ethernet Network Adapter E810-XXV-2 xxx
PROBLEM: The DDP package signature is not valid and cannot be
loaded. Entering Safe Mode.
ACTION: Install the latest driver from
"http://www.intel.com/support/go/network/adapter/home.htm.
* x is a different display name depending on the LAN board.
This event does not affect system operation.
HPE Ethernet xGb x-port xxxx Adapter
PROBLEM: Flow Control disabled on this interface. For RDMA
traffic, it is recommended that flow control be enabled end to end on
all network interfaces and switches to avoid performance
degradation from dropped packets.
ACTION: Enable link level flow control or priority flow control for
network direct port 445 on this interface.
* "x" depends on the system environment.
This event does not affect system operation.
After Standard Program Package is applied, this log will no longer be
registered.
Intel(R) Ethernet Network Adapter E810-XXV-2 xxxxx
PROBLEM: Flow Control disabled on this interface. For RDMA
traffic, it is recommended that flow control be enabled end to end on
all network interfaces and switches to avoid performance
degradation from dropped packets.
ACTION: Enable link level flow control or priority flow control for
network direct port 445 on this interface.
* "x" depends on the system environment.
This event does not affect system operation.
After Standard Program Package is applied, this log will no longer be
registered.
The driver \Driver\WudfRd failed to load for the device
xxxxxxxxxxxxxxxxxx.
This may be recorded when starting the system or connecting a disk
depending on timing, but does not affect system operation.
The application YYY with process id XXX stopped the removal or
ejection for the device ZZZ.
* ZZZ : Instance name of the device
YYY : Name of the process that was using the device
XXX : ID of the process that was using the device
This event does not affect system operation if it is logged when
applying Standard Program Package.
List of Windows Event Log

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800 seriesExpress5800/r120i-2mExpress5800/r120h-1mExpress5800/r120h-1m 2nd-genExpress5800/r120h-1m 3rd-genExpress5800/r120h-2m ... Show all

Table of Contents