Specifications; Attachments/Accessories - Toro 04861 Operator's Manual

Figure 10
1. Kickstand—C -U
UTTING NIT
S position
ERVICE
g341757
2. Spring pin

Specifications

Width
Dry weight*
Width of cut
Height of cut Refer to your cutting unit Operator's Manual.
Dependent on reel speed and reel-drive-pulley
Clip position; refer to
Mowing
3.2 km/h (2 mph) to 5.6 km/h (3.5 mph)
speed
Transport
speed
*Traction unit only. Refer to the cutting unit Operator's
Manual for the weight of each cutting unit.
Electrical Specifications
Voltage
Current
Amp Hours
IP Rating

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
11
Model 04861
91 cm (36 inches)
97 kg (207 lb)
53 cm (21 inches)
Adjusting the Clip
Rate (page 12).
8.5 km/h (5.3 mph)
48 V
DC ( )
25.6 AH
IP65