Advertisement
Available languages
Available languages
Trouble-shooting
Problem
Causes
The product is not fully
►
heated.
The power plug is not
connected or the
►
steam button is not
pressed.
There is no or insuffi-
►
cient water in the water
resevoir.
No steam
The product is used in
or
a wrong direction (e.g.
irregular
the product is upside
steam
►
down, the product is
placed horizontally, or
the steamer head
faces upward).
The air vent on the
►
water inlet cap is
blocked.
The circuit fails or the
►
fuse is burned out.
22
NI-GHD015 [i8200K-oS31A]_V1_说明书_EN,KR.indb 7
NI-GHD015 [i8200K-oS31A]_V1_说明书_EN,KR.indb 7
Solution
Wait about 20
seconds before using
the product.
Connect the power
plug and press the
steam button.
Fill the water resevoir
(by referring to "How to
fill water" on Page 15).
Use the product in the
correct direction.
Unblock the air vent
with a wooden or
bamboo toothpick.
Send your product to
an authorized service
center for inspection
and repair.
Trouble-shooting
Problem
Causes
The inner pipe is loose
►
or damaged.
Water
leakage
occurs
The product is not fully
►
heated.
When the water
resevoir is empty, the
►
water pump will run
idle, thus making a
noise.
The product is used in
a wrong direction (e.g.
The
the product is upside
product
►
down, the product is
makes a
placed horizontally, or
noise
the steamer head
faces upward).
The inner pipe is loose
►
or blocked.
The problem persists even after you
have followed the above solutions.
Solution
Send your product to
an authorized service
center for inspection
and repair.
Wait about 20
seconds before using
the product.
Fill the water resevoir
(by referring to "How to
fill water" on Page 15).
Use the product in the
correct direction.
Send your product to
an authorized service
center for inspection
and repair.
23
2022/9/1 13:34:05
2022/9/1 13:34:05
Advertisement
