After Use - Panasonic NI-GHD015 Operating Instructions Manual

• Depending on the direction in which the main body is held,
water may not be supplied from the water resevoir or steam
may not come out.
Steam spraying angle
About 45° About 45°
• When water leakage occurs or the steam is weak, wait about
one minute instead of pressing the steam button.
Notes:
a. Do not press the steam button immediately after the
product is powered on.
b. Release the steam button to shut off the steam. The steam
will be stopped in about 5 seconds. During this period, keep
the product away from your body.
c. When using the product by holding the handle, do not block
the air vent on the water inlet cap. Otherwise, steam may
not come out.
D. After the power plug is disconnected, a small amount of
steam may be ejected.This is not a sign of malfunction.
(This is because there is residual water in the main body.)
e. During use, the steam may be invisible due to the room
temperature or indoor brightness.
18
NI-GHD015 [i8200K-oS31A]_V1_说明书_EN,KR.indb 5 NI-GHD015 [i8200K-oS31A]_V1_说明书_EN,KR.indb 5
About 60°

After use

After each use
Please follow the procedure below for cleaning and
maintenance.
(1) Drainage of the water resevoir
1. Unplug the power plug to
cut off the power supply.
2. Open the water inlet cap, pour
out the water while shaking the
product, and close the
water inlet cap.
(2) Treatment of residual water
1. Insert the power plug into a
suitable socket outlet to
connect the power supply.
2. Wait about 20 seconds and
press the steam button to
turn on the steam.
3. Wait until no more steam
comes out from the steamer head,
release the steam button, and
disconnect the power plug.
Keep the product in a safe
place after it has fully
cooled down.
Note:
Store this product in a stable place.
• Wait until the product has fully cooled down before storing
it in a wardrobe or drawer.
19
2022/9/1 13:34:05 2022/9/1 13:34:05