Com1 - Bosch MIC-9502 User Manual

MIC IP fusion 9000i
9.3

COM1

Serial port function
Select a controller or a protocol from the list matching the connected camera. If you wish to
use the serial port to transmit transparent data, select Transparent. Select Terminal if you
wish to operate the unit from a terminal.
Notice!
After selecting a controller or protocol, the remaining parameters in the window are set
automatically and should not be changed apart of the camera ID.
Camera ID
If necessary, enter the ID of the peripheral you wish to control (for example a dome camera or
pan/tilt). The entered ID relates to the peripheral that is connected to the first video input. For
further video inputs, the ID is automatically counted up. The connected peripheral devices are
addressed via the respective ID.
Baud rate
Select the value for the transmission rate in bps.
Data bits
The number of data bits per character cannot be changed.
Stop bits
Select the number of stop bits per character.
Parity check
Select the type of parity check.
Interface mode
Select the desired protocol for the serial interface.
Bosch Security Systems User Manual
Interfaces | en 57
2017.11 | 0.20 | F.01U.349.011