Table of Contents
Advertisement
Upgrading memory modules
Your VivoMini comes with two SO-DIMM memory slots that allow
you to install two 2 GB, 4 GB, or 8 GB unbuffered with non-ECC 1.35 V
DDR3L 204-pin SO-DIMMs for a maximum of 16 GB memory.
IMPORTANT!
• It is recommended that you replace the memory modules
• Refer to http://www.asus.com for the list of compatible
WARNING!
• Ensure that your hands are dry before proceeding with the
• Before installing memory modules, use a grounded wrist
To install or upgrade the memory modules:
1.
Turn off your VivoMini then disconnect all cables and peripherals.
2.
Place the VivoMini on a flat stable surface, with its top side facing
down.
VivoMini UN Series
20
under professional supervision. Visit an ASUS service center
for further assistance.
DIMMs. You can only install 1.35 V DDR3L SO-DIMM to the
VivoMini's DIMM slots.
rest of the installation process.
strap or touch a safely grounded object or metal object to
avoid damaging them due to static electricity.
Advertisement
Table of Contents
