Advertisement
14- hOn
14 .4 Reg istration and Ap p Pairing
1. Connect the smartphone to the home Wi-Fi network the same with the machine connect
to.
2. Open the App.
3. Create the user profile (or log-in if it is already created previously).
4. Close the door.
5. Pairing the appliance following the instructions on the device display.
Note: Wi-Fi network
It is not possible to connect the appliance to a public Wi-Fi network. It may cause
malfunction.
Note: Use same Wi-Fi
ake sure your smart phone and the machine connect to the same network.
.5 E
nable Remote Control
14
1. Check that the router is switched on and connected to the Internet.
2. Load the laundry and close the door.
3. Choose the Remote button.
4. Start the cycle ia the APP and the control panel will be out of use.
5. Once the cycle finished, the remote control turns off.
6. After 2 minutes, the appliance will turn into off mode.
Note: Remote control expiration
Once the remote control is activated, if the end user doesn't start any cycle from app in
10 minutes, the appliance will go to Networked Delay Start Mode, and keeps remote
control up to 24 hours, then shut off.
14
isable Remote Control
.6 D
1. To exit remote control while a cycle is running, press START/PAUSE button on the
control panel. The cycle will pause and Remote will blink.
2. To resume the cycle, close the door and press START/PAUSE button. The remote
control will be reactivated and Remote will be fixed.
3. Control the appliance using the app.
14
.7
End of Cycle
1. At the end of the cycle, the remote control will deactivate.
2. After 2 minutes the appliance will automatically switch off.
32
v
With
Remote Control On
EN
Advertisement
