DeWalt DCH911 Original Instructions Manual page 36

EnGLIsh
x
Discard the battery pack with due care for
the environment.
y
Charge D WALT battery packs only with designated
e
D WALT chargers. Charging battery packs other than
e
the designated D
e
charger may make them burst or lead to other
dangerous situations.
z
Do not incinerate the battery pack.
B
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
A
TRANSPORT (with built‑in transport cap). Example: Wh
rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
Battery Type
These battery packs may be used: DCB546, DCB547, DCB547G,
DCB548, DCB549. Refer to Technical Data for more information.
Package Contents
The package contains:
1 Breaker
1 Bail/loop style auxiliary handle
1 Kitbox
1 Instruction manual
1 Li‑Ion battery pack (C1, D1, E1, G1, H1, L1, M1, P1, Q1, S1, T1,
U1, X1, Y1, Z1 models)
2 Li‑Ion battery packs (C2, D2, E2, G2, H2, L2, M2, P2, Q2, S2,
T2, U2, X2, Y2, Z2 models)
3 Li‑Ion battery packs (C3, D3, E3, G3, H3, L3, M3, P3, Q3, S3,
T3, U3, X3, Y3, Z3 models)
nOTE: Battery packs, chargers and kitboxes are not included
with N models. Battery packs and chargers are not included with
NT models. B models include Bluetooth® battery packs.
nOTE: The Bluetooth® word mark and logos are registered
trademarks owned by the Bluetooth®, SIG, Inc. and any use of
such marks by D WALT is under license. Other trademarks and
e
trade names are those of their respective owners.
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual before use.
g
Wear ear protection.
f
Wear eye protection.
34
WALT batteries with a D WALT
e
Wireless Tool Control™.
Date Code Position (Fig. A)
The production date code 13
by a 2‑digit week and is extended by a 2‑digit factory code.
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
On/off switch
1
Main handle
2
Chisel position index collar
3
Tool holder/sleeve
4
Bail/loop style auxiliary handle
5
Screw for handle mounting
6
Tool Tag mounting holes
7
Batterypack
8
Battery release button
9
White low speed LED
10
Speed control slider
11
Yellow service indicator LED
12
Date code
13
Intended Use
Your breaker is designed for breaking or demolishing concrete,
masonry, stone and asphalt.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
Your breaker is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.

WARNING: Use only D
consists of a 4‑digit year followed
WALT batteries and chargers.
e