Dell OptiFlex 3000TC Service Manual page 48

Table 6. System setup options—Integrated Devices menu (continued)
Integrated Devices
Rear USB ports
Table 7. System setup options—Storage menu
Storage
SATA/NVMe Operation
Storage Interface
Port Enablement
SMART Reporting
Enable SMART Reporting
Drive Information
M.2 PCIe SSD
Type
Device
Onboard eMMC
Type
Device
Table 8. System setup options—Display menu
Display
Primary Display
Video Primary Display
Table 9. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC
Wireless Device Enable
WLAN
Bluetooth
48 BIOS setup
By default, all options are enabled.
Enable or disable the individual rear USB ports.
By default, all options are enabled.
Enable or disable the operating mode of the integrated SATA hard drive
controller.
By default, AHCI/NVMe option is enabled.
Enable or disable the onboard drives.
By default, all the options are enabled.
Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during computer startup.
By default, the Enable SMART Reporting option is not enabled.
Displays the M.2 PCIe SSD type information of the computer.
Displays the M.2 PCIe SSD device information of the computer.
Displays the eMMC type information of the computer.
Displays the eMMC device information of the computer.
Determines the primary display when multiple controllers are available on the
computer.
By default, the Auto option is enabled.
Controls the on-board LAN controller.
By default, the Enabled with PXE option is enabled.
Enable or disable the internal WLAN device
By default, the option enabled.
Enable or disable the internal Bluetooth device
By default, the option enabled.