Table of Contents
Advertisement
6.12.1 Using the riding light
The drive system needs to be already switched
on to turn on the riding light.
Push the plus button for 1 to 2.5 seconds.
The riding light is switched on (riding light
symbol is displayed).
Push the plus button for longer than 2.5
seconds.
The riding light is switched off (riding light
symbol is not displayed).
6.12.2 Selecting the level of assistance
Press the plus button for less than one second
to increase the level of assistance.
Press the minus button for less than one
second to decrease the level of assistance.
6.12.3 Journey information
The displayed journey information can be
changed and partially reset.
6.12.3.1 Resetting the trip distance
Select the TRIP journey distance to reset the
TRIP journey distance. Press and hold both the
plus and minus buttons at the same time.
RESET will appear on the display.
If you continue pressing both buttons, the TRIP
journey distance will be re-set to 0.
6.12.3.2 Resetting the range
Select RANGE to reset the RANGE.
Press both the plus and minus buttons for a
long time at the same time.
RESET will appear on the display.
If you continue to press both buttons, the TRIP
journey distance will be set to 0.
MY20P01-32_1.0_21.06.2019
6.12.3.3 Changing the tachometer from
kilometres to miles
You can change the displayed values from
kilometres to miles.
Hold the minus button down and press the on/
off button briefly.
The value is changed from kilometres to miles.
6.12.3.4 Displaying versions and type numbers
You can retrieve the sub-system versions and
their type part numbers for maintenance purposes
if the sub-systems provide this type of information
(depends on the sub-system).
The drive system must be switched off.
Press and hold the plus and minus buttons at
the same time while the system is off.
Then press the on/off button.
Operation
76
Advertisement
Table of Contents
