Panasonic KX-TVS80 Installation Manual page 288

SYSTEM ADMINISTRATOR'S GUIDE
Parameter
Paging Code
for Group 1-8
(KX-TVS50)
or
Paging Code
for Group 1-16
(KX-TVS80)
Paging Code
for All Groups
Other Parameters-Fax Management
You can program the VPS to automatically forward incoming fax calls to a fax extension. You
can specify a maximum of 2 fax extensions as the destination for the Automatic Fax Transfer.
If the main fax extension is not available to receive a fax, the VPS will forward the fax
transmission to the alternate fax extension.
To access the proper menu for Fax Management, follow the menu path as shown:
System Administration Top Menu-1-5-7-8
Parameter
Automatic
Transfer of
Incoming Fax
Call
Main Fax
Extension No.
288
All manuals and user guides at all-guides.com
Table 67
Value Range
(Default)
Up to 12 digits Specifies the intercom paging access code required by
consisting of the PBX.
0-9, ,# for each
group
Note: The Intercom Paging Group Number available
(Group 1-8:
for each subscriber is determined on a COS-by-COS
331-338;
basis.
All Groups
[Group 9]: 33 )
or
(Group 1-16:
3301-3316;
All Groups
[Group 17]: 33 )
Table 68
Value Range
(Default)
1: Disable Enables or disables the Automatic Transfer of Incoming
2: Enable Fax Call Service.
(Disable)
Note: Automatic detection works for only the first 30s.
2-5 digits Specifies the main fax extension number.
(None)
Description/Function
Description/Function
Installation Manual