Commissioning, Operation, Diagnostics And Maintenance; Notes On Commissioning; General Information; Preparation - Bosch Rexroth KMS02 Operating Instructions Manual

42/73 Bosch Rexroth AG
Instructions for Use
5.3

Commissioning, Operation, Diagnostics and Maintenance

5.3.1

Notes on Commissioning

General Information

Preparation

Procedure

5.3.2

Notes on Operation

5.3.3

Diagnostic Functions

Diagnostic Display KSM/KMS

WARNING
Read and observe the detailed safety instructions contained in this documen‐
tation in chapter "Safety Instructions".
1. Keep the documentation of all used products ready.
2. Check the products for damage.
3. Check all mechanical and electrical connections.
4. At products supplied with a touch guard, check whether the touch guard
has been mounted.
5. Activate safety devices and monitoring systems of the installation.
When all requirements have been fulfilled, commission the drive system ac‐
cording to the instructions contained in the corresponding product documen‐
tation. See the Functional Description of the firmware for the corresponding
information.
The commissioning of controllers and control unit can require additional
steps. The check of functionality and performance of the installations is not
part of motor commissioning; instead, it is carried out within the scope of the
commissioning of the machine as a whole. Observe the information and regu‐
lations of the machine manufacturer.
Make sure that the ambient conditions described are complied with during
operation.
LED H14
Fig.5-15: LED H14 (Example KSM)
DOK-INDRV*-KMS02******-IT01-EN-P
Rexroth IndraDrive Mi Distributed Drive Controller KMS02
High electrical voltage! Danger to life, risk of
injury by electric shock or serious injury!