Table of Contents
Advertisement
2.7
Load Setup Default Settings
Use this option to load the default settings for the optimized system
configuration.
When you load the default settings, some of the
parameters are grayed-out with their fixed settings. These grayed
parameters are not user-configurable.
settings of these items, disable the Fast Boot Mode parameter in the
Basic System Configuration menu.
The following dialog box appears when you select Load Setup Default
Settings from the main menu.
Load Setup Default Settings
Are you sure
[Yes]
Select
[Yes]
to load the default settings.
2.8
Remote Diagnostic Configuration
The Remote Diagnostic Configuration allow you to set the remote
diagnostic management (RDM) parameters. This option appears on
the main screen of the BIOS Utility only when there is an RDM
module installed in the system.
Refer to the RDM User's Guide for information if your system
supports this feature.
2-30
If you want to change the
[No]
User's Guide
Advertisement
Table of Contents
