Philips ADD6920BK/90 User Manual page 9

Water temperature adjustment
• Water temperature presets: there are three water temperature presets for
selection - ambient, 45℃ and 100℃.
• Stepless temperature control: Select a water temperature preset, the
display will show the water output temperature; pressing the temperature
"+" or "-" key can increase or decrease the temperature by 1℃ each time.
Long pressing the temperature "+" or "-" key can adjust the temperature
rapidly. The range of stepless temperature adjustment is 45℃ to the boiling
point.
Water volume adjustment
• Water volume presets: There are three water volume presets for selection:
150ml, 200ml and 300ml.
• Stepless volume control: Select a water volume preset, the display will show
the water output volume; when water volume is larger than 150ml,
pressing the "+" or "-" key will adjust the volume by 50ml each time; when
water volume is lower than 150ml, pressing the "+" or "-" key will adjust the
volume by 30ml each time; long pressing the volume "+" or "-" key can
adjust the water volume rapidly.
Filtered water jug indicator
• When the �ltered water jug is installed, the �ltered water jug indicator will
light up constantly, when the �ltered water jug is not installed, the �ltered
water jug indicator will �ash.
Extracting water
• Select the water temperature and volume needed, the screen will display
the selected temperature and volume. Press the safety lock button to
unlock (automatic unlocking for ambient water). Press the extraction
button once to extract water. Press it again or press any other buttons to
stop.
Note: To avoid being scalded, keep the distance from the nozzle when
extracting hot water.
07