Fujitsu UTY-TFSXJ3 Setting Manual page 11

„ State of the Wireless LAN indicators
*Lighting pattern:
State of the Lamps
All the lamps are off
LED 2 is off or blink-
ing fast (Repeating
0.5 seconds on / 0.5
seconds off)
LED 1 is blinking
fast (Repeating 0.5
seconds on / 0.5
seconds off)
All the lamps are
blinking fast (Re-
peating 0.5 seconds
on / 0.5 seconds off)
Off On
The power to the WLAN adapter is not on.
´
The power to the access point is not on.
´
There is a possibility that the WLAN adapter is not
properly connected to the access point.
´
It is not possible to communicate with the air condi-
tioner.
´
There is a problem with the WLAN adapter.
´
Blinking
Causes and Solutions
Check that the power to the air conditioner is
on and that the air conditioner breaker is not
tripped.
Confirm that the power to the access point is
on.
Disconnect the power supply to the air con-
ditioner (via breaker or plug), and then re-
connect.
If the blinking continues for more than a few
minutes, there may be a wiring error in the air
conditioner. Contact authorized service person-
nel.
Disconnect the power supply to the air condi-
tioner (via breaker or plug), and then re-con-
nect. Set up the wireless LAN again according
to the operation manual for AIRSTAGE Mobile.
En-11