Huawei S1700-8G-AC User Manual

S1700-8G-AC Ethernet Switch
User Manual & Installation Quick Start
S1700-8G-AC以太网交换机
快速安装指南以及简易使用说明书
Rev: 02
Tool List
工具参考
Crosshead screwdriver Marker pen
十字螺丝刀
Screw Ancrotron
膨胀套
Accessories (S1700-8 -AC)
设备附件介绍(S1700-8G-AC ）
Power adapter
电源适配器
Installing the Device on a Worktable
安装设备到工作台
Install the device on a worktable.
安装设备到工作台。
Installing the Device on a Wall
安装设备到墙面
●To prevent injuries, check that there is no electrical wire at the locations to be drilled before drilling holes in the wall.
● Flammable and explosive items under the device is prohibited. Leave more than 100 mm of space around the device for proper heat dissipation.
●
在墙上打孔时，必须确认打孔处没有墙电，避免造成人身伤害。
●
设备下方禁止摆放易燃易爆物品，距离设备100mm范围内不能有异物挡住。
Mark the screw locations on the wall according to
the holes on the back of device.
根据设备后面板上的挂孔，用记号笔标记螺钉位置。
Percussion drill(φ8 Drill bit)
记号笔
冲击钻（φ8钻头）
Claw hammer
M6 screw
羊角锤
M6 螺钉
Install the Screw Ancrotron.
安装膨胀套。
φ8 Drill bit
φ8钻头
90 。
4
Service and Support
技术支持
Screw Ancrotron
膨胀套