Craftsman 240.74295 Operator's Manual page 6

check t hatthekeys onthehandle a re
properly aligned w iththeslots inthe
tool.
Figure 4
3.Grasp t hetoolattachment firmly
with onehand (note, donotgrasp on
arotating p art s uch astheauxiliary
handle), and twist t helock ringonthe
power handle t othelocked p osition
with theother h and. (see figure 5)
Figure 6
2.Pull t hepower handle a nd tool
attachment apart. The power handle
and toolattachment should separate
easily. Ifthey donot,check t obe
sure that t helockringisinthefully
unlocked position.
Attaching theBattery
1.Align theribonthebattery p ack
with thecorresponding slotintheend
ofthepower handle. (see figure 7)
Figure 5
Todetach a tool:
1.Grasp t hetool a ttachment firmly
with onehand (note, donotgrasp on
arotating p art s uch astheauxiliary
handle), and twist t helock ringonthe
power handle t otheunlocked position
with theother h and. (see figure 6)
Figure 7
2.Insert thebattery f ullyintothe
handle m aking s urethat t hespring-
loaded b uttons oneach side ofthe
battery p ack snaps i ntoplace inthe
handle.
Removing theBattery
1.Depress thespring-loaded
buttons onboth sides ofthebattery
simultaneously. (see figure 8)