Advertisement
Quick Links
Advertisement
Related Manuals for Whirlpool WCO6FMS
Summary of Contents for Whirlpool WCO6FMS
- Page 1 INSTRUCTION FOR USE Slim Hood WCO6FMS...
-
Page 2: Installation
INSTALLATION GUIDE Read all installations before installing this appliance IMPORTANT SAFETY NOTICE WARNING... - Page 3 The installation in this manual is intended for qualified installers, service technicians or persons with similar qualified background. Do not attempt to install this appliance yourself. Injury could result from installing the unit due to lack of appropriate electrical and technical background.
- Page 4 By ensuring this product is disposed correctly, you will help prevent negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling. The symbol on the product indicates that this product may not be treated as household waste.
- Page 5 Fig.1 Fig.2 Fig.3...
- Page 6 Connection to power Make sure that the voltage of power network match with the one that t t i i t c power must be handled by an authorized technician. The power cord must include a bipolar switch with contact separation distance over or equal to 3mm.
- Page 7 Filter cleaning or replacement Attention:During filter cleaning or replacement procedure, the hood must be plug off. In order to replac e or clean the filter you have to: 1. Remove the aluminum filter by pressing the filter buttons. Now you are able to change or clean the filter. The aluminum filter should be washed by dishwasher or by hands every 30 days.
- Page 8 Lamp replacement During lamp replacement procedure, the hood must be plug off. The replacement of the lamps is made if you open the aluminum filter by moving the filter buttons as the arrows shows on Fig.6. Then remove the plastic covers of the lamps carefully according to the picture below.
- Page 9 Attention It will be dangerous in the following cases: - Do not disassemble the grease filter when the hood is working. - Do not touch the lamps or surfaces surrounding after the hoods have been working for a long time. - Do not leave bare flames under the range hood, it may damage the filter or cause a fire.
- Page 10 TECHNICAL DATA (WCO6FMS) Electricity Installation Distance Voltage 220-240 V Electric hob Frequency Gas hob Power Cable length Total Fan motors Plug type UK Plug with safety mark...
-
Page 11: Troubleshooting
TROUBLE SHOOTING The cooker hood may not work or work improperly. Before calling the After-sales service, switch off the appliance, unplug the power supply and refer to this guide to determine the problem. Take off and clean filters when clogged Replace the filters... - Page 12 Warranty...