Table of Contents
Advertisement
Please beware of the following precautions before installing the DVR.
• Avoid positioning the product in any place where the unit may come into contact with moisture, dust, or soot.
• Avoid placing in direct sunlight or near heating appliances.
• Keep the product away from electric sparks or magnetic substances.
• Avoid temperature extremes (recommended operating temperature is between 0°C - 40°C).
• Do not place any conductive material through the ventilation grills.
• Keep the system turned off before installation.
• Ensure enough space is left for cable connections.
• Place the system on a solid surface with sufficient air ventilation. Avoid any surface that vibrates.
• Placing the system near electronic devices such as a radio or a TV may cause the product to breakdown.
• Do not disassemble the product without seeking assistance from LG Electronics.
• Do not place any heavy object on the system.
• Prevent any substances from being inserted into
the system.
- This may cause system breakdown.
• Install the system in a place with sufficient air venti-
lation.
- Keep at least 15cm distance between the back of
the system and the wall, and at least 5cm distance
between the side of the system and the wall.
• Do not install the system in a place with high mag-
netic, electric wave, or wireless devices such as a
radio or a TV.
- Do not install the system in a place with magnetic
objects, electric frequencies, or vibration.
• Do not place any heavy object on the system.
- This may cause system breakdown.
• Install the system on a stable, level surface.
- The system may not operate properly.
• Install the system in a place with appropriate mois-
ture and temperature levels.
- Avoid installing the system in a place with high
(over 40°C) or low (under 0°C) temperature.
• The system can be damaged from a strong impact
or vibration. Avoid throwing objects within the vicini-
ty of the system.
• Avoid direct sunlight or any heating appliances.
- Recommended operating temperature is over
0°C (32°F).
CAUTION
• Ventilate the air inside the system operation room,
and tighten the system cover firmly.
- System breakdown may be caused by an
inappropriate environment.
It is recommended to use AVR (Automatic Voltage
Regulator) for a stable power supply.
It is recommended to coil the core-ferrite around
the connector of the system to avoid electromag-
netic interference.
• The outlet must be placed on the ground.
• If there is strange sound or smell, unplug the power
cable immediately and contact the service center.
- This may cause fire or electric shock.
• In order to maintain stable system performance,
have your system checked regularly by the service
center.
- LG Electronics is not held responsible for system
breakdown caused by user mishandling.
- There is a risk of explosion if a battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.
• Do not overturn the product during use.
Get other manuals https://www.bkmanuals.com
5
Advertisement
Table of Contents
