D-Link DIR-615 User Manual page 122

DIR-615 Wireless N300 Router
User Manual
You can specify the following parameters:
Parameter
SSID
MAC address
Hostname
Enable
When you have configured the parameters, click the SAVE button.
To edit the parameters of the existing rule, in the Filters section, left-click the needed rule. In the
opened window, change the settings and click the SAVE button.
To remove the rule from the page, in the Filters section, select the checkbox located to the left of
the relevant rule and click the DELETE button.
Figure 98. The window for adding a rule for the MAC filter.
A wireless network to which the rule will be applied. Select the
needed value from the drop-down list.
In the field, enter the MAC address to which the selected filtering
mode will be applied.
The name of the device for easier identification. You can specify any
name.
If the switch is moved to the right, the rule is active.
Move the switch to the left to disable the rule.
Page 122 of 184
Configuring via Web-based Interface
Description