Horizontal Cross-Arm - GE Brivo OEC 715 Operator's Manual

Mechanical Positioning

3.2.5. Horizontal Cross-Arm

The horizontal Cross-Arm extends a maximum of 20cm.
To position the Cross-Arm:
1. Release the Cross-Arm brake by placing the brake handle in the position identified by the "unlock" label.
2. Push or pull the Cross-Arm to the desired position. Use the centimeter scale located on the Cross-Arm
as an aid in positioning.
3. Lock the Cross-Arm brake by placing the brake handle in the position identified by the "lock" label.
Horizontal Cross-Arm Brake Handle
Page 3-6