Mitsubishi Electric MELIPM Series Instruction Manual page 2

Thank you for choosing the Mitsubishi Magnetic Motor Drive Unit. This instruction
manual gives handling information and precautions for use of the drive unit.
Incorrect handling of the equipment may cause an unexpected fault. To optimize the
unit capability, please read this manual carefully before using the equipment.
Please forward this instruction manual to the end user.
Many of the diagrams and drawings in this instruction manual show the drive
unit without a cover, or partially open. Never run the drive unit in this
manner. Always replace the cover and follow this instruction manual when
operating the drive unit.
After reading this manual, store it carefully in a place where it is easily
accessible for the operator.
This instruction manual is subject to modifications for specification changes
and manual improvements. After such modifications have been made, the
instruction manual will be published as a revised version with a new number
located on the bottom left of the back cover.
This product has not been designed or manufactured for use in or with a
device or system which will be used under circumstances where life may be
endangered.
Consult with Mitsubishi if you are planning to use this product for special
purposes, e.g. equipment or systems designed for manned transport
vehicles, medical purposes, aerospace, nuclear power, electric power or
undersea junctions.
This product has been manufactured under strict quality control. However,
when installing the product where serious accidents or losses could occur if
the product fails, install appropriate safety devices in the system.
Do not use this product with any load other than the specified motor.
You cannot use a single drive unit with two or more motors.
Please read here first
General precautions
For safe operation of this product
Get other manuals https://www.bkmanuals.com
1