Page 1 Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per LG NANO 81 55" (55NANO819QA ) o cerca il tuo prodotto tra le migliori offerte di Televisori...
Page 2: Table Of Contents
Contents Getting Started with LG webOS TV ..................
Page 3 ..................Content Recommendation .
Page 4 ..................Troubleshooting LG Account Issues .
Page 5: Getting Started With Lg Webos Tv
Returns to the most recently used TV or external input. You can get recommendations from various channels and programmes. You must log in to your LG account to get personalized content recommendations. You must connect to the network to use the recommendation feature.
Page 6: Manage Home
Available features vary depending on the region or service. Manage Home Manage LG webOS TV Home You can change the order of the displayed apps or content lists by pressing the button on the remote control.
Page 7: Live Tv Preparation
reset them, it takes some time to receive recommendations for contents again. Home Settings : When turning the power on, go to the screen that sets the Home behavior or advertising display. User Guide User Guide : Move to the app.
Page 8 Connect the LAN port of the TV and the router using a LAN cable. The router should be connected to the Internet beforehand. If the router supports DHCP, the TV is automatically connected to the network when you connect the TV to the network with a LAN cable. If the Network Is Not Automatically Connected Press the button on the remote control.
Page 9 Resetting the router may cause network connection problems. In this case, the router will operate normally if you turn it off and disconnect the TV, and then reconnect and turn it on. LG Electronics is not responsible for network connectivity or operation failure due to problems such as equipment failure or disconnected lines.
Page 10: Managing Your Lg Account
You can sign up for LG membership and log in with your email address in Account. Alternatively, you can sign up for LG membership using the ID and password of an external service account.
Page 11: About User Guide
About User Guide About User Guide For information on each feature of the LG webOS TV, consult the User Guide available on the TV. You can check the description of the associated User Guide by clicking User Guide in the upper-right corner while using the app, or by clicking during setup in Settings.
Page 12: Using The Magic Remote
The previously registered remote control is deregistered and then registered again. Unregistering Magic Remote If you have multiple LG Smart TVs and want to register the Magic Remote currently in use to another TV, you must unregister the previous one.
Page 13 For buttons with , please long-press (hold for more than a second). Quick Help : Launch ● GUIDE : Launch Guide ● GUIDE : Checking the saved programmes. : The Quick Access edit screen appears. ● : Display the additional buttons on the remote control. ●...
Page 14 then re-appear. The pointer will disappear if you press / / / buttons, and the remote will work as a standard remote control. You can control the TV by scrolling or pressing Wheel (OK) button in the middle of / / / buttons. When viewing a screen that requires scrolling, you can easily move up and down by scrolling the Wheel (OK) button.
Page 15 For buttons with , please long-press (hold for more than a second). Quick Help : Launch ● GUIDE : Launch Guide ● GUIDE : Checking the saved programmes. : The Quick Access edit screen appears. ● : Display the additional buttons on the remote control. ●...
Page 16: Using Tv Functions Through Speech
the pointer disappears from the screen, shake the Magic Remote right and left. It will then re-appear. The pointer will disappear if you press / / / buttons, and the remote will work as a standard remote control. You can control the TV by scrolling or pressing Wheel (OK) button in the middle of / / / buttons.
Page 17 Some models may not be supported. Menu Language Location must be set as the official language of the country in to see correct search results. If Menu Language is not set as the official language, some functions may be limited. General System Language...
Page 18: Speech To Text
volume, pronunciation, accent, and talking speed) and the surroundings (noise and TV volume). To achieve accurate recognition of your speech, you must pronounce words in a slow and accurate manner at an appropriate voice volume at a distance of about 10 cm away from the Magic Remote’s microphone.
Page 19 If there are words similar to that which you spoke out loud, you may see a list of multiple results as shown below. If you do not get the results you want, press RETRY to try again. Select a result and it will be displayed on the text box. Cautions When Using Speech to Text Check the network connection before using the Speech to Text function.
Page 20: Control Your Tv With Your Voice With Google Assistant
Language . To temporarily switch to another speech recognition language, press the button in the voice recognition information display window. You can only use this function to agree to voice recognition terms. The Speech to Text rate may vary depending on the user’s characteristics (voice, pronunciation, intonation and speed) and the environment (noise and TV volume).
Page 21: To View More Features Of The Remote Control
Press the (Amazon Alexa) button on the remote control to access the settings and help information for Amazon Alexa. Different services may run in countries where Amazon Alexa is not supported. Service operation and supported countries may change in accordance with Amazon’s policies.
Page 22: Using Universal Remote Control
Additional features can be set when you watch a live broadcast. Available features may vary depending on the broadcast signal. More Actions The types of buttons appearing on the vary, depending on the region and the type of connected device. Using Universal Remote Control Automatically Setting the Universal Remote Control When you set up the universal remote control, you can control the peripherals (Blu-...
Page 23: Launching Apps Through Quick Access
You can purchase the Magic Remote separately if it is not provided. Some models may not be supported. When changing settings on a device, make sure it is powered on first. To set up a universal remote control with the latest information, connect to the network and accept the User Agreements.
Page 24: Connecting To Simplink (Hdmi-Cec)
Selecting a number that has already been registered allows deregistering it. When you select a number that has not been registered, items that can be registered will be shown. An item that has been registered to a different number is indicated with a check mark. You can view a brief instruction for this function.
Page 25: Shortcuts To Accessibility
This feature works only with devices with the logo. Check for the SIMPLINK logo on the external device. Use of any product other than those specified may cause problems during operation. ® To use SIMPLINK, you need to use a high-speed HDMI cable with CEC (Consumer ®...
Page 26: Connecting An Input Device To Usb
Connect your keyboard to the USB port. You can enter text with the connected keyboard device. It is not possible to enter text on some screens. It is recommended that you use a product that has been tested for compatibility with LG TVs. Logitech K360, Logitech K400, Logitech K750 You can change the input language by pressing the language switch key or the right Alt key, And also can change by pressing the Ctrl key and the Space key at same time.
Page 27: Enjoy Live Tv
Controller, Logitech F310, Logitech F710 Connecting Bluetooth Input Devices You can connect and use devices such as a Bluetooth-enabled keyboard, mouse, or a gamepad with your TV. To see the details, click the Settings Devices External Devices Connect Bluetooth Controller User Guide.
Page 28: Viewing Guide
TV Scheduler : You can enter the time and date of a programme to schedule watching or recording it at the set time. To see the details, click the Enjoy Live TV Using TV Scheduler User Guide Recordings : You can check the recordings stored in the storage device and play the recordings.
Page 29: Checking Programme Info
Select each area to access the corresponding feature. You can view information on the programme and broadcaster. You can view information about the programme you are currently watching as well as the focused programme information. Select the button or the title of the desired programme. You can view more information on the programme and perform Watch Record...
Page 30: Who.where.what
appears. You can move the banner's position by pressing the button on the remote control and selecting Change Banner Location. If your remote control does not have a button, press and hold the button. It displays the information about the programme you are watching. Select a programme banner to enter the detailed information pop-up to see the detailed programme information or run additional features related to the banner.
Page 31 watching. Information may vary depending on the programme. Some models may not be supported. You must connect to the network and agree to User Agreements before you use it. Entering Who.Where.What? Method 1. Press the Wheel (OK) button on your remote control. Press Who.Where.What? on the programme banner.
Page 32: Live Playback
Pressing the button allows you to share the address of the website containing the information through a text message, QR code, or the LG ThinQ app or send it to a smart device. To use the sharing feature, the smart device must have the latest version of the LG ThinQ app installed on it and must be connected to the TV.
Page 33 previously if you go out for a while. Input the USB HDD in the USB port. Press the button on the remote control and select Live Playback. If your remote control does not have a button, press and hold the button.
Page 34: Recording
Some models may not be supported. Recording Using Instant Recording Connect a USB HDD or USB stick to a USB port. It is recommended that you record to a USB HDD. Press the button on the remote control and select Record. If your remote control does not have a button, press and hold the button.
Page 35: Using Tv Scheduler
Because of the content protection technology used, the recorded video cannot be played on PCs or other TV models. Also, the video cannot be played if the TV’s video circuit is replaced. Do not remove the USB cable while recording. If you force your TV to power off while recording, the recorded content may not be saved.
Page 36 Using the TV Scheduler You can enter the time and date of a programme to schedule watching or recording it at the set time. Press on the remote control to select Live TV and view the live broadcast. Press the button on the remote control and select Scheduler.
Page 37 If you want to record a live broadcast, click the Record Watch button. In case of an upcoming programme, click the Scheduled Recording Reminder button. Record Scheduled Recording may not be supported on some models. Scheduled recording does not guarantee exact recording time of the programme because the programme will be record as the information of broadcaster.
Page 38: Playing Recorded Tv Programs
Playing Recorded TV Programs Managing Recordings You can view and play recordings stored on storage devices by using the Recordings app. Live TV by pressing . Press the button on the remote control and select Recordings. If your remote control does not have a button, press and hold the button.
Page 39: Watching Internet Channel (Lg Channels)
You can set features such as Resume and the audio language that can be outputted. A list of recordings is shown below. The configurable items differ depending on model. Watching Internet Channel (LG Channels) Watching Internet Programme You can watch real-time broadcasts through this service over the Internet.
Page 40: Teletext
Press the button on the remote control and select Channels. You can also watch LG Channels by pressing the (Programmes) / buttons on the remote control. You can use the ’Interactive Programme’ service that enables users to conveniently enjoy content related to the current programme without having to switch apps.
Page 41 Colour button To select the preceding or following page. Number button Enters the page number to move to. (Programmes) / Button To select the preceding or following page. Some models may not be supported. Special Teletext Function Press the button on the remote control. If your remote control does not have a button, press and hold the button.
Page 42: Hbbtv
Select this menu to display concealed information, such as solutions to riddles or puzzles. Update Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at the top left hand corner of the screen. When the updated page is available then display will change to the page number.
Page 43: Ci Information
services in addition to traditional digital teletext services, all directly on to the TV in a seamless experience. HbbTV services can be activated in a number of ways, the most popular being pressing the . Users typically explore services with the traditional navigation keys (including the OK button and the ).
Page 44: Apps And Content
This function enables you to watch some encrypted services (pay services). ● If you remove the CI Module, you cannot watch pay services. ● CI (Common Interface) functions may not be possible depending upon the country ● broadcasting circumstances. When the module is inserted into the CI slot, you can access the module menu. ●...
Page 45 Apps and Content Content Search User Guide To see the details, click the You can log in to your LG account. You can manage apps, such as updating or deleting installed apps. Closes the app. To turn off the app from running in the background, press the...
Page 46 Content Recommendation You can get content recommendations based on the programme you are watching or TV viewing patterns. If you are watching the TV using a set-top box, you must complete the setup of the universal remote control to use the recommendation feature normally. For more information, see How to Operate TV Using Universal Remote Control User...
Page 47 Press the button on the remote control. Launch Search for a variety of content and information using the desired search terms. Enter a search term. Shows recent searches. You can select one from the suggested keywords and proceed to search. You can browse content by genre.
Page 48 User Guide for more information on the action. You can log in or out with your LG ThinQ account. Edit Inputs : You can edit the name of the connected device or apply the related settings. Edit home IoT devices...
Page 49 Log in to your LG ThinQ account. A list of the registered LG ThinQ devices will appear. If you are in an area where the LG ThinQ app is not in service, LG ThinQ device connection will not be supported.
Page 50 Home IoT Devices . You can connect and see devices registered with your LG ThinQ account or IoT devices. Once the device is connected, the card will be changed to a smaller size and appear at the bottom of the device connection list.
Page 51 Run the LG ThinQ app installed on your smart device. Follow the instructions from LG ThinQ app to connect your smart device to the TV. When your account information of LG ThinQ is linked to the TV, you can manage...
Page 52 View All Simple remote control operation is possible. Select and try using the remote control in full screen. You can share and enjoy the sound, screen, or content on the TV and smart device interactively. Displays a list of apps installed on the TV. Displays a list of devices connected to the TV's external input.
Page 53 Some controls may be limited in external input mode. The app’s screen and functionality are subject to change without prior notice. Available features may differ depending on your country and OS. Watching Smart Device Screen on TV Watching Smart Device Screen on TV Enable Screen Share mode on the smart device.
Page 54 Playing Sound from a Smart Device through the TV’s Speakers Playing Sound from a Smart Device through the TV’s Speakers Connect a smart device to the TV via Bluetooth to play sound from the smart device through the TV’s speakers. Turn the smart device’s Bluetooth on, then select the TV from the list of devices.
Page 55 and a rated current of 500 mA or less. If you use a device requiring a higher voltage/current than the rated voltage/current, it may not operate properly due to lack of current. It is recommended that you use a USB hub or USB storage device with a power supply. We recommend using a storage device with a capacity of 32 GB for the USB memory and 2 TB or less for the USB hard disk.
Page 56 You can select a device connected to your TV. Displayed only when music is playing. Press the to access the Play Music screen. Search Launch View Type : Selects a content display mode. Sort : Select the option to sort content. Group : If you filter by Music...
Page 57 Shows the previous content. Starts the slide show. Shows the next content. Rotates photos. Enlarges or reduces the photo. 360-degree photos can be viewed in 360 degrees. Using the 360° VR Play on a normal photo may distort the image. Some models may not be supported.
Page 58 Shows the previous video. Plays or pauses the video. Shows the next video. You can change subtitle settings. Rotates videos. Fast-rewinds the video at higher speeds. You can do the settings related to play on repeat of the video. Fast-forwards the video at higher speeds. 360-degree videos can be viewed in 360 degrees.
Page 59 a song. You can set the random play mode. You can set the repeat play mode. Lyrics are available for music files that provide them. In some music files, you can choose a lyric section and move the playback position. The lyrics feature is only supported on some devices.
Page 60 Enter the IP address, User Name, and Password of the PC you wish to connect to, and select Connect to connect the PC. The screen of the connected PC will be displayed on the TV screen and can be operated with the TV remote control. Both TV and PC can be connected only after network connection and settings are set.
Page 61 Select “OK” to save the settings. Select the connected PC in the Home Dashboard app on the TV, and then select and play the file you want. To play on other operating systems or devices, refer to the manual of the operating system/device.
Page 62: Making The Most Of Smart Tv
Connect Wireless (Windows 10) Click the Notification Centre icon on the taskbar on the PC screen and select Connect. Select the TV you want to connect to and request the connection. After the connection is established, the TV will display the screen of the connected It is recommended that you always update your device to be connected to your TV to the latest OS version for a reliable connection.
Page 63: To Use Magic Explorer
To Use Magic Explorer To Use Magic Explorer You can run a search conveniently through various apps based on on-screen text or video information. Magic Explorer can be used if the pointer colour of the Magic Remote changes (e.g., to the ). Press and hold the Wheel (OK) button on the image if you are watching a...
Page 64 If you input the search word, it will find the information about search word base on the search engine. Press the button on the remote control. Run the Web Browser application. You can refresh the web page you are viewing. You can type in a web address to navigate to a specific website or enter a search term directly.
Page 65 browser for your PC. Some contents may not be played properly. ● Flash Plug-in is not supported, and only HTML5 media is supported. ● Plug-in installation is not supported. ● Media in formats other than JPEG/PNG/GIF may not be played. ●...
Page 66 LG Electronics headquarters (Korea). The submitted information will only be used to improve the Web Browser performance.
Page 67: Connecting A Camera To The Tv
Select Camera. For a detailed description of the camera’s functions, refer to the device's manual. The camera must be purchased separately. It is recommended that you use a product that has been tested for compatibility with LG TVs. Logitech C920/C920s/C922 Pro/C922x/C925e/C930c/C930e Depending on the installation status of the TV, the camera may not be mounted on the TV.
Page 68: Using Sports Alert
By pressing Multi View, you can run the video screen or broadcast screen, and camera simultaneously. For more information, see Making the Most of Smart TV Using Multi View User Guide. Multi View This feature is available only on models that support the feature.
Page 69: Settings
Live Plus to On. Some models may not be supported. You can still access some of the Live Plus features when using external devices such as a set-top box. Live Plus If you set up a universal remote control, you can use even when using external devices.
Page 70 Launch Multi View OLED Care Directs to the settings. Network Directs to the settings. You can set more options. You can also long-press button of the remote control to run the All settings directly. You can add/delete the quick setting items or change their order. Wheel (OK) Move to an item that can be set up, press the remote control's button once,...
Page 71: Picture
Menu Colour : You can change the colour of the menu. Game Optimiser Game Optimiser : Directs to the settings. To see the details, click the Settings Game Optimiser User Guide All Settings : You can set more options. You can also long-press button of the remote control to run the All settings directly.
Page 72 Suitable picture for sports games. Sharpens the image of rapid movements such as kicking or throwing a ball. The name of the sport may differ depending on region. Game Optimiser Suitable picture for gameplay. FILMMAKER MODE Provides optimized Cinema Picture quality certified by UHD Alliance, the standard setting body for UHD-related technologies.
Page 73 FILMMAKER MODE Provides optimized Cinema Picture quality certified by UHD Alliance, the standard setting body for UHD-related technologies. To auto-switch to FILMMAKER MODE when a signal that can be operated with this mode is entered, set FILMMAKER MODE Auto Start If the HDR/Dolby Vision video signal is input to the models that do not support the HDR/Dolby Vision technology, It will be provide normal signals picture mode options.
Page 74 4-Way Zoom You can adjust the horizontal/vertical/diagonal dimensions of the screen and align the screen horizontally/vertically by using Adjust Zoom Ratio Adjust Screen Position. The configurable items differ depending on model. The picture may get distorted while zooming in or out. Selecting a different screen size from the original size may cause the image to look different.
Page 75 OLED Pixel Brightness Adjusts the display brightness by varying the brightness of the OLED panel. Depending on the Energy Saving Auto Maximum ), you may not be able to adjust the OLED Pixel Brightness In this case, navigate to General OLED Care Device Self Care Energy...
Page 76 Maximizes the contrast ratio by making the bright side of the screen brighter and the dark side of the screen darker. : Disables the LED Local Dimming function. ● Medium High : Changes the contrast ratio. ● Turning this option may increase energy consumption.
Page 77 Dynamic It expands the Colour Gamut to match the scene. Adobe RGB Sets the Colour Gamut to Adobe RGB standards. Fine Tune This is used when experts control it by using a test pattern. You can control it by selecting areas of six colours (Red/Green/Blue/Cyan/Magenta/Yellow). For normal images, adjustments may not result in noticeable colour changes.
Page 78 Method is set to Points, use Low to select shadows and High to select highlights. Method is set to 10 Points Signal Level(%), you can select brightness using numbers indicating 10 levels. When the Method is set to 22 Points Signal Level(%), you can select the brightness with the 22 levels of brightness.
Page 79 image. Super Resolution Adjusts the resolution to make dim and blurred images clearer. Noise Reduction Removes small dots that stand out so as to make the image clean. MPEG Noise Reduction Reduces the noise produced during the creation of digital video signals. Smooth Gradation It reduces the phenomenon that the outline of the image is rugged and in a staircase pattern and displays a smoother screen.
Page 80: Sound
Applying the Current Picture Settings to All Inputs Picture Advanced Settings Apply to All Inputs The settings you specify only apply to the currently selected input mode. To apply your current picture settings to all input modes, select Apply to All Inputs.
Page 81 Select Mode Sound Select Mode You can select the most suitable sound mode for each genre. AI Sound AI Sound Pro Depending on the content you watch, you can enjoy the optimised sound and virtual surround in real time. Standard Optimises the sound for all types of content.
Page 82 For some Bluetooth devices, the device volume can be controlled by selecting from the ● connection list. LG Sound Sync devices will automatically try to connect to the recently used devices ● when you turn the TV on. We recommend that you connect an LG audio device that supports LG Sound Sync, ●...
Page 83 For more information on the purchase of WiSA authorized products, check on www.wisaassociation.org. Mobile Device If you install the LG ThinQ app on a smart device and connect it to your TV, you can use the device as a speaker for the TV. Use Wired Speaker...
Page 84 If you connect the wired headphones while the TV is powered on, it automatically detects the wired headphones and redirects audio through them. Use External Speakers with TV Speaker Sound Sound Out Use External Speakers with TV Speaker Audio can be played through the multiple devices simultaneously. Bluetooth Device + TV Speaker Both the internal speaker of the TV and the Bluetooth speaker can be used to output the sound at the same time or a surround sound can be used.
Page 85 simultaneously. Some models may not be supported. If you connect the wired headphones while the TV is powered on, it automatically detects the wired headphones and redirects audio through them. Balance Sound Advanced Settings Balance You can adjust the volume of the left and right speakers. This setting is only available for Internal TV Speaker.
Page 86 This mode optimises the sound based on the TV setup. Stand Select this if the TV is installed in stand-type. Wall-mounted Select this if the TV is installed in wall-mounted type. This setting is only available for Internal TV Speaker. Automatic Volume Adjustment Sound Advanced Settings Automatic Volume Adjustment If it is set to On, the volume will be automatically adjusted to a suitable level for each...
Page 87 TV, depending on the model. In this case, it will be matched with the Sound Mode with similar effects. LG Sound Sync Sound Advanced Settings LG Sound Sync Connect the LG Sound Sync device to the optical digital input port and set Sound Out Optical Out Device.
Page 88 Sync device using a TV remote control. If the auto-power feature of the sound bar that supports LG Sound Sync is set to On, the sound bar will be turned on or off together when the TV is turned on or off.
Page 89: Ai Service
Metadata-Enhanced Audio Transmission PCM (Dolby MAT PCM). Digital Sound Output Pass Through is set to and HDMI input is Dolby TrueHD or ● Multi-Channel PCM, audio can be output as Bypass. Using eARC Supported Audio Device Sound Advanced Settings eARC Support eARC is a technology that can send and receive more sound information faster thanks to its wider bandwidth than that of the conventional ARC.
Page 90 General AI Service AI Acoustic Tuning With the AI Acoustic Tuning feature, you can detect the space where your TV is installed using your Magic Remote’s microphone to optimise the audio of your TV for your environment. Select Start New Sound Tuning to measure the space in which the TV is installed.
Page 91: Game Optimiser
history and app usage history. Alarm Who.Where.What? You can get recommendations for the information related to the broadcast you are watching. This feature may not be available in some countries. Smart Tips You can get an introduction to smart features you can use when watching TV or using an app.
Page 92 Sets up the features for an immersive experience when you play with a video game console. Press the button on the remote control. Select Game Optimiser. Selecting turns on all related settings. It only works with HDMI inputs. Picture Select Mode Game Optimiser If you set to a mode other than...
Page 93 Settings Quick Settings Game Dashboard User Guide Please see for more Game Dashboard information about AI Game Sound Optimises the sound for gameplay. When this feature is set to Sound Select Mode is changed to Game Optimiser HDMI (eARC/ARC) This setting only applies to the internal speakers of the TV or Sound Mode Share connected devices that support This reduces screen cracking and video lagging during game play.
Page 94 You can fine-tune dark areas. White Stabiliser You can fine-tune light areas. Adjust Contrast Adjusts the contrast of the bright and dark areas of the picture. Black Level Adjusts the overall screen brightness. You may use the Black Level settings particularly to set the dark part of the image. Adjust Sharpness Adjusts the sharpness of the image.
Page 95: Family Settings
Family Settings Usage Limits Setting General Family Settings Usage Limits Setting You can use the TV in the set time period only. Outside of the set time period, you must enter your password to use the TV. Enable the function to On.
Page 96: Programmes
Programmes Automatically Setting Up Programme General Programmes Programme Tuning (Programme Tuning & Settings) Auto Tuning Automatically tunes the programmes. Select Country where the TV is used. Programme settings change depending on the country you choose. Initiate Auto Tuning. Select programme tuning modes. Set Auto Tuning following screen instructions.
Page 97 Start Frequency (kHz) Enter a user-defined start frequency range. End Frequency (kHz) Enter a user-defined end frequency range. Set Satellite Setting You can add/delete/set the satellite you want. This function only works when the programme mode is satellite. Satellite Select your desired Satellite. LNB Frequency Select one value from 9750/10600, 9750/10750, 9750, 10600, 10750, 11300, 5150, MDU1, MDU2, MDU3, MDU4, MDU5.
Page 98 Select On to use Unicable and set the Unicable in the Unicable Settings menu. When Unicable is enabled, 22kHz Tone, DiSEqC, Motor Type are disabled. Motor Type Select Motor Type to use Motor and set the Motor in the Motor Setting menu. When Motor is enabled, 22kHz Tone, DiSEqC,...
Page 99 USALS : Set your current location (Longitude/Latitude). To Use Manual Programme Tuning General Programmes Programme Tuning (Programme Tuning & Settings) Manual Tuning This function is for manually searching and saving programmes. For digital broadcasting, signal strength and signal quality can be checked. Editing Transponder General Programmes Programme Tuning &...
Page 100 It updates the changed Programme List information by based on country broadcasting circumstance and satellite. It updates the Programme List when the TV is turned off. After updates, the Programme List may be changed. If not want, select Off. Some models may not be supported. To Use the Signal Test General Programmes Programme Tuning (Programme Tuning &...
Page 101 Skip / Restore : Set the selected programmes to be skipped when switching programmes, or disable the skipping option of the programmes previously set to be skipped. Move : Move the selected programmes. Edit Programme Numbers : Change the numbers of the selected programmes. Delete : Delete the selected programmes.
Page 102: Network
various angles. Some models may not be supported. Learn More about HbbTV HbbTV (Hybrid Broadcast Broadband TV) is a new broadcasting standard that enables super-teletext type services, delivered by a broadcast TV programme, to be integrated or linked to online services delivered over broadband to a connected Smart TV. To see the details, click the Enjoy Live TV HbbTV User...
Page 103 IP address information. In addition, you can change the IP address and DNS server address you want to connect to by pressing the Edit button. Getting Started with LG For more information on how to connect to the network, see webOS TV Connecting to the Network User Guide...
Page 104: Devices
TV screen. When a device you've connected before is turned on, it automatically connects to your TV. To disconnect the existing connection, click Disconnect. It is recommended that you use a product that has been tested for compatibility with LG TVs.
Page 105 Bluetooth Mouse : Logitech M535, Logitech MX Master 2S, Apple Magic Mouse2 Bluetooth Keyboard : Logitech K480, Arteck HB030B, Arteck HB192, Apple Magic Keyboard Bluetooth Gamepad : Sony Dualshock4, Microsoft Xbox One S Controller, Microsoft Xbox Series X Controller, NVIDIA SHIELD Controller This feature is available for Bluetooth-enabled models only.
Page 106 Delete Connection History You can delete the connection history of the devices connected to the TV on the wireless network. Setting HDMI External Input General Devices HDMI Settings You can apply settings to ensure a clear picture and easy control for the HDMI connected devices.
Page 107: System
Resolution Frame rate (Hz) Colour Depth/Chroma Sampling 8 bit 10 bit 12 bit 3840 × 2160p YCbCr 4:2:0 YCbCr 4:2:0 YCbCr 4:2:0 4096 × 2160p 59.94 YCbCr 4:2:2 YCbCr 4:2:2 YCbCr 4:2:2 1) 2) 1) 2) YCbCr 4:4:4 YCbCr 4:4:4 YCbCr 4:4:4 RGB 4:4:4 RGB 4:4:4...
Page 108 General System Language You can choose the menu language displayed on the screen and the audio language of the digital broadcast. Menu Language You can select one of the menu languages to be displayed on the screen. The language for the speech recognition will be automatically set to the selected language for the menu.
Page 109 Postcode This function is used to set the broadcast location of the TV by entering your postcode. LG Services Country If you don’t set the Automatically, you can select the country manually. You must set the country manually when you are not connected to the network.
Page 110 Time : Set the time at which to turn the TV on. ● Timer Repeat None : Set the day of the week. Set the option to to operate the feature ● only once. Input : Set an external input to display when the power is turned on. ●...
Page 111 Enter the numbers “0313” in the master password input window, then press OK. The password will be reset. Managing Your LG Account You can sign up for LG membership and log in with your email address in Account. For more information, see...
Page 112 Notifications General System Additional Settings Notifications You can view or delete notifications from TV apps and LG services. For notifications that support shortcuts, you can go directly to that app or website. You can check the details by selecting the desired item. If it supports shortcuts, you can launch the app.
Page 113 General System Additional Settings Standby Light You can turn the standby light on or off. Some models may not be supported. Setting the Pointer of Magic Remote General System Additional Settings Pointer Options You can set the pointer speed and size you want while it is on the screen. Tracking Speed Sets the pointer speed.
Page 114 Live Plus is a service that provides various information on the programme you watch. To see the details, click the Making the Most of Smart TV Live Plus User Guide. Some models may not be supported. To Use Settings Help General System Additional Settings Settings Help When set to On, you can get help for the selected items when navigating through the Settings menu.
Page 115: Energy Saving
All items except the network settings are changed to their default settings. Safety Reset to Initial Settings is set to , you should type the password to Do not turn off the power during initialization. We recommend that you reset the TV to Reset to Initial Settings before you sell it or transfer it to a third party.
Page 116: Accessibility
Energy Saving Step If you use function, brightness of your TV will be affected. Accessibility To Use Audio Guidance General Accessibility Audio Guidance Audio Guidance is set to On, audio guides will be provided in various situations, such as when you change programmes, adjust the volume or change settings and input signals.
Page 117 Settings For instructions on how to connect and set up a Bluetooth device, refer to Sound Use External Speakers with TV Speaker User Guide Changing the Menu to High-Contrast Screen General Accessibility High Contrast When this feature is set to On, it adjusts the background of some of the menus on the screen and font colours to highlight the contrast between the light and dark areas.
Page 118: Support
Audio Type General Accessibility Audio Type Audio commentary or subtitles are provided for those who are hard of hearing or visually impaired. Normal Selects default Audio. Audio Description For the visually impaired Selects the preferred default Audio combined with Visual Impaired Audio.
Page 119 Support Software Update Uses software update to check and obtain the latest version. Auto Update When it is set to On, updates are automatically made without a separate confirmation procedure except for some important updates. Check for Updates When checking for the latest update version, you can only perform updates if an update file of a later version is available.
Page 120: Troubleshooting
signal. Privacy & Terms Support Privacy & Terms User Agreements These are the terms and conditions related to use of the Smart TV service and protection of privacy. Legal Notice It's a legal notice for services provided via TV. Open Source Software Notice You can view the instructions for each item.
Page 121 ● LG Remote Service You can get help for troubleshooting through the remote control. LG Remote Service, make sure to contact the LG Electronics Customer Service Center. This function may not be available in some countries or models. Quick Help...
Page 122 may appear during power-on. This does not mean the product is defective. The pointer of Magic Remote is not appear in the screen. Hold the remote control towards the TV and press the buttons at the same time for more than 5 seconds until instructions appear. The previously registered remote control is deregistered and then registered again.
Page 123 Replace the batteries in the remote control. (Use alkaline batteries.) Check if there are any obstacles blocking the signal in front of the connected device’s remote control receiver. Troubleshooting Screen Issues Troubleshooting Screen Issues If you experience any of the problems below while using the product, please check the following: There may be no problem with the product.
Page 124 The screen shakes after the momentary appearance of vertical/horizontal lines and net pattern. Connect wireless telephones, hairdryers, electrical drills, etc. to a different power outlet. The problem may be caused by high-frequency electronic devices such as another TV or strong electro-magnetic sources nearby. Each programme has a different image quality.
Page 125 I don’t see anything, or the image keeps flickering when I try to connect the HDMI cable. ® Check whether your HDMI cable is compliant with the specifications. You may ® experience flickering or a blank screen if the HDMI cable is faulty (bent, broken).
Page 126 With some HDMI cables, signals may not be received. Change the settings of the connected device to the supported signal. Troubleshooting Sound Issues Troubleshooting Sound Issues If you experience any of the problems below while using the product, please check the following: There may be no problem with the product.
Page 127 company’s transmission signal. Please have your broadcasting services provider (wired/cable) diagnose the problem. Sound Advanced Settings If all programmes are out of sync, go to Match Screen and Sound and adjust the sync. If you are using a set-top box, consult its supplier. The volume changes when I change the programme.
Page 128 following: There may be no problem with the product. The screen remains blank after it is connected to a PC. Check that the PC is properly connected to the TV. Turn the TV off and back on using the remote control. Restart the PC with the TV on.
Page 129 Information Supported Video File Formats in the User Guide. I cannot find a file in the Media Player. Check whether the files saved on your USB storage device can be read by the PC. Check that the file extension is supported. Change the filter to I see a message that says the file is not supported.
Page 130 If subtitles encoding is incorrectly set, subtitles may not be displayed properly. Press the button on the remote control during video playback actions. Select change the Code Page value. If you play a video file stored on another device by using the content sharing feature, subtitles may not be available depending on the programme you use.
Page 131 Programmes from the set-top box cannot be recorded. Protected content is not recorded. Scheduled Recording possible even if the TV is off? Scheduled Recording starts and completes recording at the set time even if the TV is off. If the TV is turned off completely as follows, Scheduled Recording cannot be used.
Page 132 Power off and power on in the following order; 1. Turn your cable modem off and back on, and wait for the device to reset. 2. Turn the wired/wireless router off and back on, and wait for the device to reset. 3.
Page 133 I wish to delete the account saved on the TV. When you log in to your LG account on the TV, the account will be saved to the TV. You can delete accounts stored on the TV at any time, as follows.
Page 134 I wish to close my account on the TV. You can also close your LG account on the TV as follows. Select General System LG Account. Select Account Management for the account you wish to set up. Select Terminate My Account.
Page 135 If you experience any of the problems below while using the product, please check the following: There may be no problem with the product. Some parts of a particular website are not visible when I am using the Internet. Web Browser supports only HTML5 media and not Flash Plug-in.
Page 136 File Format Format Resolution jpeg, jpg, jpe JPEG Minimum : 64 × 64 Maximum Normal Type : 15360 (W) × 8640 (H) Progressive Type : 1920 (W) × 1440 (H) Minimum : 64 × 64 Maximum : 5760 (W) × 5760 (H) Minimum : 64 ×...
Page 137 AV1 7680 × 4320@60P HEVC 7680 × 4320@60P Main/Main10@L6.1 Maximum 100Mbps VVC 7680 × 4320@60P Supported External Subtitles smi, srt, sub (MicroDVD, SubViewer 1.0/2.0), ass, ssa, txt (TMPlayer), psb (PowerDivX), dcs (DLP Cinema) Supported Embedded Subtitles Format Matroska (mkv) : Sub Station Alpha (SSA), Advanced Sub Station Alpha (ASS), SRT MP4 : Timed Text Supported Video Codecs Extension Codec...
Page 138 Estimation (Qpel) are not supported. ULTRA HD video (ULTRA HD models only) : 3840 × 2160, 4096 × 2160 Some HEVC-encoded ULTRA HD videos other than the content officially provided by LG Electronics may not be played. Some codecs can be supported after a software upgrade.
Page 139 Audio Dolby Digital, Dolby Digital Plus, AAC Only Window Media Audio V7 and later are supported. The AAC main profile is not supported. Video files created by some encoders may not be played. Video files in a different format than specified may not be played properly. Video files stored on a USB storage device that does not support High Speed may not be played properly.
Page 140 Bit rate 64 kbps ~ 320 kbps Sample freq. 8 kHz ~ 48 kHz Support Vorbis Channels mono, stereo Bit rate 128 kbps ~ 320 kbps Sample freq. 8 kHz ~ 48 kHz Support Channels up to 6 ch flac Bit rate Sample freq.
Page 141 640 × 480p 31.46 59.94 31.5 720 × 480p 31.46 59.94 31.5 720 × 576p 31.25 1280 × 720p 37.5 44.95 59.94 1920 × 1080i 28.12 33.71 59.94 33.75 1920 × 1080p 26.97 23.97 28.12 33.71 29.97 33.75 56.25...
Page 142 67.43 59.94 67.5 2560 × 1080p 2) 3) (ULTRA HD, 8K models only) 3840 × 2160p 53.94 23.97 (ULTRA HD, 8K models only) 56.25 67.43 29.97 67.5 112.5 134.86 59.94 4096 × 2160p 53.94 23.97 (ULTRA HD, 8K models only) 56.25 67.43 29.97...
Page 143 112.5 134.86 59.94 7680 × 4320p 107.89 23.97 (8K models only) 131.87 29.97 263.74 59.94 1) Supported when HDMI Deep Colour is set to 4K. 2) Supported when Wide Aspect Ratio is set to 21:9. 3) Supported when Wide Aspect Ratio is set to 32:9.
Page 144 640 × 350 31.46 70.09 720 × 400 31.46 70.08 640 × 480 31.46 59.94 800 × 600 37.87 60.31 1024 × 768 48.36 1152 × 864 54.34 60.05 1360 × 768 47.71 60.01 1280 × 1024 63.98 60.02 1920 × 1080 67.5 2560 ×...
Page 145 56.25 67.43 29.97 67.5 112.5 134.86 59.94 4096 × 2160 53.94 23.97 (ULTRA HD, 8K models only) 56.25 67.43 29.97 67.5 112.5 134.86 59.94 7680 × 4320 107.89 23.97 (8K models only)
Page 146 131.87 29.97 263.74 59.94 1) Supported when HDMI Deep Colour is set to 4K. 2) Supported when HDMI Deep Colour is set to 8K. 3) Supported when HDMI Deep Colour is set to Off. 4) Supported when Wide Aspect Ratio is set to 21:9.
Page 147 The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics Inc. is under license. Other trademarks and trade names are those of their respective owners. Quickset...
Page 148 Apps on Premium area are arranged in accordance with the yearly app usage (no. of ○ app access) among LG Smart TV users by country. No. of apps may vary from 7 to 20 by each year's platform and the arrangement cannot be customized.

LG NANO 81 User Manual

Quick Links

Related Manuals for LG NANO 81

Summary of Contents for LG NANO 81

Table of Contents