Set-Up Via Web Browser - Bosch DINION IP starlight 6000 HD Installation Manual

DINION IP starlight 6000
HD
To see live images in your browser it might be necessary to
download and install the MPEG-ActiveX from the Bosch
download store.
Protected network
If a RADIUS server is used for network access control (802.1x
authentication), the unit must be configured first. To configure
the unit, connect it directly to a computer using a network cable
and configure the two parameters, Identity and Password. Only
after these have been configured can communication with the
unit via the network occur.
IP Helper tool
Alternatively, use the IP Helper tool to detect Bosch devices on
the network:
1.
2.
3.
4.
7.2.1

Set-up via web browser

1.
2.
3.
4.
If required, configure the other parameters to suit your working
environment (for example, ID, passwords, date and time). Refer
to the operation manuals of the software for more information.
Bosch Security Systems
Access the Bosch download store (http://
downloadstore.boschsecurity.com/).
Download and install IP Helper.
Choose your specific camera from the list of cameras
shown in the table on the left of the screen
Click Open in browser to view the camera interface.
Open the camera in the web browser.
Click Configuration in the title bar.
Select Camera >> Installer Menu from the side bar.
Click the Lens Wizard button and follow the steps to
configure the lens.
Configuration | en
2016.06 | v1.0 | AM18-Q0705
21