Panasonic MIR-H163 Series Operating Instructions Manual page 12

INCUBATOR COMPONENTS
14
11
10. Timer mode select key (TIMER MODE): This key is to switch a normal mode and a timer mode C.
Normal mode: The operation is finished when a set time of operation timer is expired.
Timer mode C: The operation continues with a set temperature even when a set time of operation timer is
expired.
Refer to page 15.
11. Timer mode C lamp (MODE C): This lamp lights when a timer mode C is active.
12. Run/Stop key (RUN/STOP): In a setting mode, press this key to start operation after setting. During
operation, press this key to finish operation (Refer to page14～17).
Note: Except for a setting mode, an operation cannot be started by pressing this key.
13. Start lamp (START): This lamp lights when the unit is operating.
Note: This lamp lights when a delay timer is being set or when a continuous operation is being set after
an operation timer is finished.
14. Alarm lamp (ALARM): This lamp lights when the unit is in warning condition.
15. Alarm buzzer stop key (BZ): Press this key to silence the buzzer in the event that the alarm
operates and the buzzer sounds. Press it once again to reactive the buzzer.
Table 1: Display in the digital temperature indicator and digital timer indicator.
During stop operation
When a delay timer is
being set.
During When an operation time is
operation being set.
(In case of Timer mode C)
When a continuous operation is
being set after a operation timer
is finished.
*: When a continuous operation is being set in a operation timer, "--:--" is displayed.
13
15 10
Set value Digital temperature
lamp Indicator (TEMP)
OFF Present temperature
OFF Present temperature
ON Set temperature
OFF Present temperature
ON Set temperature
OFF Present temperature
ON Set temperature
11
12
Digital timer indicator
(TIME)
―
Remaining time of
delay timer
Set time of
operation timer*
Remaining time of
operation timer*
Set time of
operation timer*
"--:--"
Set time of
operation timer*