Philips TAB8947 User Manual page 31

•
You have not enabled the Bluetooth
function of the device. See the user
manual of the device on how to
enable the function.
•
The device is not correctly
connected.Connect the device
correctly.
•
The soundbar is already connected
with another Bluetooth device.
Disconnect the connected device,
then try again.
Quality of audio play from a connected
Bluetooth device is poor.
•
The Bluetooth reception is poor.
Move the device closer to the
soundbar, or remove any obstacle
between the device and the
soundbar.
I can't find the Bluetooth name of this
unit on my Bluetooth device
•
Ensure the Bluetooth function is
activated on your Bluetooth device.
•
Re-pair the unit with your Bluetooth
device.
Wi-Fi
Wi-Fi Connection cannot be
established.
•
Check the availability of WLAN
network on the router.
•
Place the Wi-Fi router closer to the
unit.
•
Make sure the password is correct.
•
Check the WLAN function or reboot
the modem and Wi-Fi router.
Dolby Atmos
Cannot achieve outstanding Dolby Atmos
effects.
•
For non-HDMI connections (such as
use of USB, Bluetooth, OPTICAL or
AUDIO IN), limited height surround
effects are generated. See the
section of 'Dolby Atmos' about
how to achieve best Dolby Atmos
effects.
Remote control does not work
•
Before you press any playback
control button, first select the
correct source.
•
Reduce the distance between the
remote control and the unit.
•
Insert the battery with its polarities
(+/-) aligned as indicated.
•
Replace the battery.
•
Aim the remote control directly at
the sensor on the front of the unit.
This is a 15 mins power off
function, one of the ERPII
standard requirement for saving
power
•
When the unit's external input
signal level is too low, the unit
will be turned off automatically
in 15 minutes. Please increase
the volume level of your external
device.
The subwoofer is idle or the
indicator of subwoofer do not
light up
•
Please unplug power cord from the
mains sockect, and plug it in again
after 3 minutes.
EN 31