Unpacking; First Use; Switching On/Off /Selecting A Heat Setting; Automatic Switch-Off - Silvercrest SBHS 50 C2 Operating Instructions Manual

Unpacking

♦ Remove all parts of the appliance and the operating instructions from the box.
♦ Remove all packaging material.
WARNING! RISK OF SUFFOCATION!
► Do not allow children to play with packaging materials. There is a risk of
suffocation.

First use

■ Before you use the appliance, ensure that ...
– the appliance is in working order,
– all packaging materials have been removed.
■ Clean the appliance as described in "Cleaning and care".
Switching on/off /Selecting a heat setting
■ After you have plugged the appliance into the mains, you can switch it on
with the level switch 6 and select the heat level:
– "0"
– "1"
– "2"
After you have selected a heat level, the respective LED 4/5 starts to flash,
■
indicating that the appliance is heating up.
As soon as the selected temperature is reached, the LED 4/5 lights up
permanently.
Automatic switch-off
This appliance is fitted with an automatic switch-off system. After 30 minutes,
the appliance will switch itself off automatically. After around 25 minutes, the
LED 4/5 that was lit last starts to flash to inform you that the appliance is
about to switch off automatically. If you want to continue using the appliance,
switch it off for a moment and then back on again.
NOTE
► The automatic switch-off is a safety function only and is not intended as
a replacement for switching the appliance off properly using the level
switch 6!
│ GB │ IE
■ 6
The appliance is switched off, both LEDs 4/5 are off
for fine hair (the LED for fine hair (level 1) 5 flashes)
for thick hair (the LED for thick hair (level 2) 4 flashes)
SBHS 50 C2