Assembling And Operating The Appliance - Silvercrest KH 451 Operating Instructions Manual

Tips for safety:
• In cases of danger, immediately remove the power
plug from the wall socket.
• Use the appliance exclusively for the purposes
described in these operating instructions.
• Always be alert! Always pay attention to what
you are doing and act w w i i t t h h c c o o m m m m o o n n s s e e n n s s e e . Never
use the appliance when you are distracted or
don't feel well.
• Ensure that the appliance is correctly and com-
pletely assembled before taking it into use. The
appliance can first be taken into use when the
clamps have been closed.
• After every use of the juice extractor ensure that
the On/Off switch is moved to the position "Off"
("0"). . The motor must come to a complete stop
before you begin to disassemble the appliance.
• Remove the power plug from the wall socket
when the appliance is taken out of use, when
removing components and before cleaning it.
• Do not use the appliance outdoors.
Assembling and operating the
appliance
• Select a safe and secure positioning for the
juice extractor. For optimal handling we recom-
mend that the appliance is positioned with the
power cable running from the rear of the app-
liance to the wall socket. All operating elements
can now be directly and easily handled:
- at the front, the On/Off switch
- to the left, the container for fruit pulp and
s
vegetable mash
- to the right, the outlet pipe for the juice
Ensure that the appliance is switched off and the plug
removed from the wall socket before assembling the
appliance. If you do not, there is a great risk that
you could injure yourself.
1. Place the juice catchment bowl
2. Place the filter
3. Place the housing lid
4. Ensure that the housing lid
5. Press the lower part of the claps
6. Slide the container for fruit pulp and vegetable
7. Place a glass or similar receptacle under the
8. Insert the power plug
o
,
y .
- 20 -
Warning:
u
liance base , so that the three tenons and the
y
juice outlet are securely caught in the recesses.
d on the drive shaft
it down so that it perceptibly engages. Ensure
that it is firmly seated before continuing with the
assembly.
e
t
bowl , so that the loading shaft is sitting above
d
the cutters of the filter
the recesses of the juice catchment bowl
r
the clasps and hook them into the notches on
e
the housing lid .
appliance until they engage.
mash s from below under the ejection shaft.
y
juice outlet .
i
t
on the app-
f and press
on the juice catchment
.
e is sitting firmly in
t
. Lift
r against the
into the wall socket.