Motorola L404C User Manual page 10

Doc Title : Product Data - User Manual
Model : Motorola Active Pro (L402C)
BATTERY PERFORMANCE
In ideal conditions, fully charged batteries should give about 12 hours talk time or 180 hours standby time on a
single charge.
Note that new batteries do not reach full capacity until they have been in normal use for several days.
To keep your batteries in the best condition, leave the handset off the base for a few hours at a time.
Running the batteries right down at least once a week will help them last as long as possible.
The charge capacity of rechargeable batteries will reduce with time as they wear out, giving the handset less
talk/standby time. Eventually they will need to be replaced.
After charging your handset for the first time, subsequent charging time is about 6–8 hours a day. Batteries and
handset may become warm during charging. This is normal.
Connecting the base station
1. Connect the handset to the base station with the provided cable (red).
2. Plug the power supply (purple) & line cord (green) into the base station.
3. Plug the other end of power supply & line cord into the wall jack.
4. Always use the cables provided in the box.
5. Use only the provided adapter.
Wall mounting on base
This phone can be mounted on any standard wall plate.
1. Plug the power supply (purple) & line cord (green) into the base station.
2. Snap the wall mount adapter into the notches on the base's back.
3. Plug the other end of power supply & line cord into the wall jack.
4. Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone
is firmly seated.
NOTE
DO NOT use a power outlet controlled by a wall switch.
Make sure the wall is capable of supporting the weight of the phone, and use the proper type of anchoring device
for the wall material.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
R.00
10 of 46