Personal Settings; Set Date & Time; Handset Tones; Set The Ringer Tone - Motorola L404C User Manual

Doc Title : Product Data - User Manual
Model : Motorola Active Pro (L402C)

12 PERSONAL SETTINGS

12.1 Set Date & Time
Providing you have subscribed to your network's Caller ID service, the date and time is set automatically for all
handsets every time a call is received. The date and time is recorded with each answering machine message you
receive. If you do not have a Caller ID service you can set the date and time manually.
1. Press <Menu> to select DATE & TIME.
2. Press <Menu> and edit the date.
TIPS
Alternatively, you can press <Up/Down> to move the cursor to toggle the input fields YEAR and DATE.
3. Press <Menu> and edit the time in 12hr format. Press <Up/Down> to toggle AM/PM settings.
4. Press <Menu> to save the settings.

12.2 Handset Tones

WARNING
When the phone is ringing, avoid holding the earpiece too close to your ear as it may damage your hearing.

12.2.1 Set the ringer tone

1. Press <Menu> and <Up/Down> to select SETUP HS.
2. Press <Menu> to select RINGER TONE.
3. Press <Menu> and <Up/Down> to select a ringer melody. The current ringer melody is played for 5 seconds.
4. Press <Menu> to save.

12.2.2 Set the ringer volume

1. Press <Menu> and <Up/Down> to select SETUP HS.
2. Press <Menu> and <Up/Down> to select RINGER VOLUME.
3. Press <Up/Down> to increase or decrease the volume level. (6 levels are available, including ringer off. The
corresponding volume effect will be played while browsing the volume option.)
4. Press <Menu> to save.

12.2.3 Key tones on/off

When you press a key on the handset you hear a beep. You can switch these beeps on or off.
1. Press <Menu> and <Up/Down> to select SETUP HS.
2. Press <Menu> and <Up/Down> to select KEY TONE.
3. Press <Menu> and <Up/Down> to turn on/off the key tone.
4. Press <Menu> to save.

12.2.4 Battery low tone on/off

1. Press <Menu> and <Up/Down> to select SETUP HS.
2. Press <Menu> and <Up/Down> to select LOW BATT TONE.
3. Press <Menu> and <Up/Down> to turn on/off the battery low tone.
4. Press <Menu> to save.

12.2.5 No coverage tone on/off

1. Press <Menu> and <Up/Down> to select SETUP HS.
2. Press <Menu> and <Up/Down> to select OUT RANGE TONE.
3. Press <Menu> and <Up/Down> to turn on/off the no coverage tone.
4. Press <Menu> to save.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
R.00
36 of 46