Sealey SA297.V2 Instructions

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to Wear eye
instruction protection
manual
1. SAFETY
Follow all workshop safety rules, regulations, and conditions when using wrench.
9
Only qualified and trained operators should install, adjust or use the assembly power tool for threaded fasteners.
9
DO NOT modify this assembly power tool for threaded fasteners. Modifications can reduce the effectiveness of safety measures and
8
increase the risks to the operator.
DO NOT discard the safety instructions; give them to the operator.
8
DO NOT use the power tool for threaded fasteners if it has been damaged.
8
Tools shall be inspected periodically to verify that the markings are legibly marked on the tool. The user shall contact the manufacturer
9
to obtain replacement marking labels when necessary.
1.1. HAZARDS:
1.1.1. PROJECTILE
Failure of the workpiece, of accessories or even of the inserted tool itself can generate high-velocity projectiles.
9
Always wear impact-resistant eye protection during the operation of the assembly power tool for threaded fasteners. The grade of
9
protection required should be assessed for each use.
Ensure that the workpiece is securely fixed.
9
1.1.2. ENTANGLEMENT
Entanglement hazards can result in choking, scalping and/or lacerations if loose clothing, personal jewellery, neckwear, hair or gloves
9
are not kept away from the tool and accessories.
Gloves can become entangled with the rotating drive, causing severed or broken fingers. Rotating drive sockets and drive extensions
9
can easily entangle rubber-coated or metal-reinforced gloves.
DO NOT wear loose-fitting gloves or gloves with cut or frayed fingers.
8
Never hold the drive, socket or drive extension.
8
Keep hands away from rotating drives.
9
1.1.3. OPERATING
The use of the tool can expose the operator's hands to hazards including crushing, impacts, cuts and abrasions and heat. Wear
9
suitable gloves to protect hands.
Operators and maintenance personnel shall be physically able to handle the bulk, weight and power of the tool.
9
Hold the tool correctly; be ready to counteract normal or sudden movements and have both hands available.
9
Maintain a balanced body position and secure footing.
9
In cases where the means to absorb the reaction torque are requested, it is recommended to use a suspension arm whenever
9
possible. If that is not possible, side handles are recommended for straight case and pistol-grip tools.
Release the start-and-stop device in the case of an interruption of the energy supply.
9
Use only lubricants recommended by the manufacturer.
9
Fingers can be crushed in open-ended crow-foot nutrunners.
9
DO NOT use in confined spaces and beware of crushing hands between tool and workpiece, especially when unscrewing.
8
1.1.4. REPETITIVE MOTIONS
When using a power tool for, the operator can experience discomfort in the hands, arms, shoulders, neck, or other parts of the body.
9
While using an assembly power tool for threaded fasteners, the operator should adopt a comfortable posture while maintaining secure
footing and avoiding awkward or off-balanced postures. The operator should change posture during extended tasks, which can help
avoid discomfort and fatigue.
If the operator experiences symptoms such as persistent or recurring discomfort, pain, throbbing, aching, tingling, numbness, burning
9
sensations or stiffness, these warning signs should not be ignored. The operator should tell the employer and consult a qualified health
professional.
1.1.5. ACCESSORIES
Disconnect the assembly power tool for threaded fasteners from the energy supply before changing the inserted tool or accessory.
9
DO NOT touch sockets or accessories during impacting, as this increases the risk of cuts, burns or vibration injuries.
8
Use only sizes and types of accessories and consumables that are recommended by the assembly power tool for threaded fasteners
9
manufacturer; do not use other types or sizes of accessories and consumables.
Use only impact-wrench-rated sockets in good condition, as poor condition or hand sockets and accessories used with impact
9
wrenches can shatter and become a projectile.
© Jack Sealey Limited
1"SQ DRIVE AIR IMPACT WRENCH - PIN
CLUTCH
MODEL NO:
Wear ear Wear
protection protective
gloves
Original Language Version
SA297.V2
Wear a mask Wear safety
footwear
SA297.V2 Issue:1 24/03/23