Advertisement
Disconnect the product from the
power supply before cleaning
and when not in use.
Refer to the "Cleaning and
care" section for instructions on
how to clean the product.
˜ Before first use
Remove all the packaging materials.
*
Clean the product (see "Cleaning and care").
*
Boil the maximum water volume of 1.7 litres
*
(see "Operation"). After boiling, discard the
water to remove any production and transport
residues.
˜ Operation
m
Danger of burns! The lid
closed when pouring hot water. Otherwise,
hot water or steam could escape over the rim
causing burns.
˜ Placing the product
Keep the power cord
*
Wrap the excess power cord onto the cord
storage
(bottom of the base
8 ]
[
Guide the power cord
*
cord guide
.
7 ]
[
Place the base
9 ]
[
*
Maintain a safe distance to walls and
cupboards to avoid damages caused by rising
steam.
must remain
[
2 ]
as short as possible.
6 ]
[
) .
9 ]
[
through the power
6 ]
[
on an even, stable surface.
˜ Boiling water
Press the lid opening button
*
lid
. Fill the water kettle
[
2 ]
Place the water kettle
*
Push the I/O switch
*
The LED ring
(on the bottom of the water
[
10 ]
kettle
) lights up. The colour of the LED ring
[
12 ]
changes with the water temperature.
Colour
Temperature (approx.)
Purple
Dark Blue
Light Blue
Green
Red
The product automatically turns off when the
*
water is boiled.
˜ Cleaning and care
m
WARNING! The product shall not be
immersed in water or other liquids. Do not
hold the product under running water.
Always disconnect the product from the power
*
supply before cleaning.
Check the product prior to each use for visible
*
signs of damage.
˜ Cleaning
Do not use any abrasive, aggressive cleaners
*
or hard brushes to clean the product.
Clean the product with a slightly damp cloth.
*
Use a mild detergent, if necessary.
Rub all parts dry with a clean cloth.
*
to open the
[
3 ]
with water.
[
12 ]
onto the base
12 ]
[
9 ]
[
into the I position.
[
5 ]
≤ 50 °C
51–70 °C
71–80 °C
81–90 °C
> 91 °C
GB/IE/NI
.
11
Advertisement
