Whirlpool VS2511 Use And Care Manual page 10

PRODUCT CHARGING
Charging the Vacuum Cleaner
Charge the battery when:
˙using the product for the first time
˙after not using the product for a long period of time
˙when the unit is at low power and the battery/ charging indicator flashes red.
1. Insert the handheld unit to the upright unit
Make sure the upright unit is switched OFF. Avoid
any obstacles in between the hand-held unit and
the upright unit.
2. Attach the upright unit onto the charging bracket
˙Make sure the charging bracket is placed on a flat stable floor.
˙Attached the upright unit onto the charging bracket.
˙If the upright unit is not attached to the charging
bracket properly, charging will not start.
˙Avoid any dust in between the charging bracket
and the unit, clean the contacts if necessary.
˙Be careful of the unit will be tripped
over by the power cable during charging.
3. Connect the power cable to the main socket
˙The charging indicator will illuminate red to
indicate that the vacuum cleaner is being charged.
NOTE: The charging indicator will turns to blue
when the battery is fully charged.
HINT: It is recommended to charge the vacuum
cleaner for at least 6 hours for before use.
˙It is normal that the charging bracket and the unit
will get warm while charging.
˙Even if the switch button is turned on, put the
vacuum cleaner back into the charging bracket,
the vacuum cleaner will be automatically stop working.
˙During the battery recharge process on charging bracket, the vacuum
cleaner has the circuitry protect feature. Even press on the switch
button, the product will be still in power-off mode.
10
Socket for
Adaptor
Light
on