Setting Up; Before Taking Into Use; Operation; Adjusting The Browning Level - Silvercrest STC 950 D3 Operating Instructions Manual

Hide thumbs Also See for STC 950 D3:
Table of Contents

Advertisement

Available languages

Available languages

You should only use the highest level on the toasting dial 2 for large slices
of dark bread. With this browning level light bread will scorch and become
inedible. In addition, it may cause the generation of smoke. If this occurs,
press the button "Stop"
from the mains power socket.

Setting up

CAUTION! RISK OF FIRE
You should therefore NEVER locate the appliance close to or underneath
inflammable objects, especially not under curtains or suspended cupboards.
Unwind the cable completely from around the cable winder 9 and lead it
through the cable clamp 1.
Place the appliance on a level and heat-resistant surface.
Insert the plug into a mains power socket.
NOTICE
When the toaster is not in use, always remove the plug from the mains power
socket. This is the only way to ensure that the appliance is current-free.

Before taking into use

Operate the toaster without bread for 3 times at the maximum browning
level "6".
Afterwards, clean the toaster as described in the chapter "Cleaning".
NOTICE
The operating button 8 only engages when the cable is connected to a
mains power socket.
With the first usage a slight smell can arise (minimal smoke development is
also possible). This is normal and dissipates after a short time. Provide for
sufficient ventilation. For example, open a window.

Operation

Adjusting the browning level

The desired level of browning, from "light" (1) to "dark" (6), can be adjusted
infinitely with the toasting dial 2.
GB │ IE │ NI │ CY
8 
5 immediately and disconnect the power cable
STC 950 D3

Advertisement

Table of Contents
loading

This manual is also suitable for:

352743 2010

Table of Contents