Capturing A Motion Image - Sharp VE-CG40U Operation Manual

Basic Operations
Capturing
Capturing a Motion
Image
You can take a moving picture up to 30
seconds in the same way as you do with a
video camera and record that image on the
card.
Status indicator
1
Insert a card into the camera (see page
9).
2
Remove the lens cap.
3
Set the Mode Dial to "=".
4
Press the Power button
until the camera turns on.
5
Press the Shutter button fully to
begin capturing.
14
VE-CG40U-013-016
Mode dial
Shutter button
Power button
14
To pause capturing
Press the Shutter button fully again.
Notes:
• You cannot use the zoom, digital zoom and the
flash for capturing motion images.
• If the card becomes full during motion image
capture, the camera automatically stops
recording.
• The camera captures the motion image in
320K240 pixels.
• See page 18 for how to playback a motion
image.
• The following settings are not available in movie
image mode.
- Self timer
- Exposure value setting
- Gamma setting
02.8.27, 7:29 PM