Philips 9000 Series Manual page 26

22
English
Removing the rechargeable shaver battery
Only remove the rechargeable battery when you discard the
shaver. Before you remove the battery, make sure that the
shaver is disconnected from the wall socket and that the
battery is completely empty.
Take any necessary safety precautions when you handle
tools to open the shaver and when you dispose of the
rechargeable battery.
Be careful, the battery strips are sharp.
1 Insert the screwdriver into the slot between the front and back
panel in the bottom of the appliance. Remove the back panel.
2 Remove the front panel.
3 Unscrew the two screws at the top of the inner panel and remove
the inner panel.
4 Remove the rechargeable battery with a screwdriver.
Guarantee and support
If you need information or support, please visit
www.philips.com/support or read the separate worldwide guarantee
leaflet.
Guarantee restrictions
The shaving heads (cutters and guards) are not covered by the terms
of the international guarantee because they are subject to wear.
Troubleshooting
This chapter summarizes the most common problems you could
encounter with the appliance. If you are unable to solve the problem
with the information below, visit
of frequently asked questions or contact the Consumer Care Center in
your country.
www.philips.com/support
for a list