3. INSTALLATION METHOD
1. Wired remote controller dimensions
2. Wiring diagram :
Applicable to KJR-120C1/BTF-E only
red
black
yellow
brown
4-Core Shield Cable, the length is
decided by installation
Wire controller
Applicable to KJR-120C1/TF-E only
red
black
yellow
brown
4-Core Shield Cable, the length is
decided by installation
Wire controller
3. Wiring diagram
4-core shielding cable
•
Connect the female joint of cable group from the mainboard with the male joint of connection cable group. (See Fig. 3-3)
•
Please connect the other side of connection wire group with the male joint of cable leads from controller. (See Fig. 3-3)
4. Remove the upper part of wired controller
•
Insert a slotted screwdriver into the slots in the lower part of the controller (2 places), and remove the upper part of the wire controller
cover. (Fig. 3-4)
The PCB is mounted in the upper part of the controller. Be careful
not to damage the board with the slot screwdriver.
WIRED CONTROLLER OF AIR CONDITIONER
Insert of the
mainboard CN40
red
black
yellow
brown
Indoor unit mainboard
Insert of the Multi-
function control box CN5
red
black
yellow
brown
Indoor unit Multi-function control board
The connection wires group-1
The connection wires group-2
NOTICE
Mainboard
INSTALLATION METHOD | 3
Fig. 3-1
Fig. 3-2 (a)
Fig. 3-2 (b)
Fig. 3-3
Slots
Fig. 3-4
6720872735 (2017/04)